It is currently Tue Mar 17, 2020 2:59 am

All times are UTC - 7 hours



Post new topic Reply to topic  [ 5 posts ] 
Author Message
Post subject: Need some HH wiring help...
Posted: Wed Oct 23, 2013 9:32 pm
Offline
Roadie
Roadie

Joined: Thu Mar 28, 2013 7:46 pm
Posts: 235
Location: Jamestown, TN
Guys, I need some know how on wiring an HH loaded pickguard in my second strat. my main strat is an FSR Aztec Gold strat deluxe with a Dimarzio injector loaded pickguard on it. The pickguard was solderless, so it was a cinch. I also have a tri burst 2013 strat deluxe that had a short in its S-1 switch so I decided to try something a little different. I have a HH loaded pickguard from GFS. It has one volume and one tone pot. and a 3 way switch. My dilemma is as follows:

1. The pickguard has a black wire, and a white wire that must be soldered to my strat Based on what was on it before, I assume these go direct to the output jack as the previous wires were white and black. However, the black wire has a shielded ground coming out of it too?
2. I have a ground wire from the tremolo cavity and a ground where the bridge pickup goes also? Do I just solder both of those body ground wires to the volume pot, and the black and white wires from the pickguard to the output jack? What about the shielding ground on the black wire from the pickguard?

Sorry if I didn't convey my issue in clear guitar lingo. I'm still new to repair portion of guitar electronics. Thanks for any help.


Top
Profile
Fender Play Winter Sale 2020
Post subject: Re: Need some HH wiring help...
Posted: Thu Oct 24, 2013 2:36 am
Offline
Rock Icon
Rock Icon
User avatar

Joined: Fri Feb 05, 2010 4:31 am
Posts: 14050
Location: Province de Québec, Canada
Look here , this page right up side ; SUPPORT , STRINGED INSTRUMENTS SERVICE DIAGRAMS and look for Stratocaster HH diagramÉ


Top
Profile
Post subject: Re: Need some HH wiring help...
Posted: Thu Oct 24, 2013 2:45 pm
Offline
Professional Musician
Professional Musician
User avatar

Joined: Sun Jun 28, 2009 6:57 pm
Posts: 1868
Location: Kansas City Mo
jasonk931 wrote:
Guys, I need some know how on wiring an HH loaded pickguard in my second strat. my main strat is an FSR Aztec Gold strat deluxe with a Dimarzio injector loaded pickguard on it. The pickguard was solderless, so it was a cinch. I also have a tri burst 2013 strat deluxe that had a short in its S-1 switch so I decided to try something a little different. I have a HH loaded pickguard from GFS. It has one volume and one tone pot. and a 3 way switch. My dilemma is as follows:

1. The pickguard has a black wire, and a white wire that must be soldered to my strat Based on what was on it before, I assume these go direct to the output jack as the previous wires were white and black. However, the black wire has a shielded ground coming out of it too?
2. I have a ground wire from the tremolo cavity and a ground where the bridge pickup goes also? Do I just solder both of those body ground wires to the volume pot, and the black and white wires from the pickguard to the output jack? What about the shielding ground on the black wire from the pickguard?

Sorry if I didn't convey my issue in clear guitar lingo. I'm still new to repair portion of guitar electronics. Thanks for any help.


Use this just disregard the inline volumes as you have a master volume but the hot and ground for output jack will be the same.

Image

_________________
https://www.facebook.com/groups/fenderguitarandamp/


Top
Profile
Post subject: Re: Need some HH wiring help...
Posted: Thu Oct 24, 2013 2:50 pm
Offline
Professional Musician
Professional Musician
User avatar

Joined: Sun Jun 28, 2009 6:57 pm
Posts: 1868
Location: Kansas City Mo
The output white wire that goes to the jack tip will go to the middle lug of the volume pot and the ground will go to the back kettle of the volume pot.

_________________
https://www.facebook.com/groups/fenderguitarandamp/


Top
Profile
Post subject: Re: Need some HH wiring help...
Posted: Fri Oct 25, 2013 8:51 am
Offline
Roadie
Roadie

Joined: Thu Mar 28, 2013 7:46 pm
Posts: 235
Location: Jamestown, TN
Thanks guys. That helped a ton. Got er wired and rockin! 8)


Top
Profile
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 7 hours

Fender Play Winter Sale 2020

Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to: