installing new noiseless vintage with jb humbucker(hss),should I change all those pots and install the restors and caps and what goes where instructions are vage? Thanks.

Welcome.

Leave the pots alone as the JB was designed around 250Ks and the VNs will sound like fecal matter with any higher resistance pot. No resistors are required and the OEM cap is fine.

Follow the Strat wiring diagram of your choice.

With the VNs, the green and black wires are ground (-). The remaining bright color wire from each pickup is your hot (+).

With the JB, solder the red and white wires together and insulate them; the bare is your ground. The only variable here is: The green wire should be your hot wire and the black should be your ground. Upon wiring everything up, if you find the JB out of phase with the VN, simply reverse the JB's green and black wires.

You're welcome.

_________________
You dig?

OK thanks I'll just drop them in and see what happens?The way a have it now,JB in bridge I have push pull on the bottom tone control,humbuck down and2 singles up( a littlenoisey some time(non-humbuck)Middle stock(no tone control),neck stock(upper tone conrol), out of phase with middle pickup ,to get out of phase sound on switch 4.All switching is stock.Thing that threw was set comes with 2-1meg pots and 1 500K the paper says it call for 3-meg, and 2 caps and a restor.Im really just trying to get rid all the noise in neck and mid pickups.Thanks I'll try that.

You're welcome!

_________________
You dig?

If you are using a full sized JB humbucker, I'd suggest using a 500K pot on the 2nd tone which is only for the JB humbucker. For the two single coils, the norm is 250k tone pot for the neck and middle. Also use a .022uf cap on the JB and a .047uf cap (or whatever Fender suggests/provides) on the single coils.

_________________
"Epitaph on a blues musician’s tombstone: “I didn’t wake up this morning”" Davy Knowles


facebook.com/313DBC

Okay,thanks.I know those are the values for standard pickups.I'm just new to this Noiseless Vintage set,I'm not gonna use the bridge single.I like the full JB in there.I'm gonna call Fender maybe mine was packaged wrong.Just tring ta rid the buzz from the singles,some times can deal with it sometimes just to annoying,especially with tubescreamer,thanks.