Hey all. How would I go about fixing a stripped screw on the pickguard and output jack. It won't tighten down and it is driving me nut. Thanks

Small pieces of a toothpick, or similar sized pieces of wood, cut slightly shorter than the depth of the screw hole. Placing a piece or two into each hole will give the screws something to grip. Works quite well.

You should delete your other (double) post.

_________________
---> "The amp should be SWITCHED OFF AND UNPLUGGED before you do this!" <---

Por favor, disculpe mi español, no se llega a la práctica con mucha frecuencia.