Hi,
a new member in Sweden here.
Which Stratocaster models have thin necks? I have a 97-98 American Standard with a nice thin neck (thickness about 22 mm). Is there even thinner models out there? If not which models have these 22 mm necks?

Keep bending! //Stefan

Not sure if You have like a guitar center over there or something similar,You could try calling a dealer in Your area that is familiar with range of fender strats?

Because You might not get a response on this forum,try strat-talk forums they may can help too?

Hope this helps?

_________________
Everything belongs to JESUS!

1998 Fender Deluxe Super Strat
2008 PRS SE Singlecut

Marshall MgHD100FX single
Line6 Spider ll
Crate Kx 15


Digitech GNX1
Boss DS-1 pedal

Stefan61...send an e-mail to consumerrelations@fender.com...and they may be able to help you with neck thickness specs. This way you will know exactly what it is you have and they may be able to tell you of other models with that spec. Tell them the guitar you have and the serial number, then ask them your questions. They are very helpful and usually pretty quick to respond. They should also be able to tell you if they currently sell any product with a thinner neck.

Pay no attention to the other response to your post...not sure why he/she would direct you to another forum just because he/she didn't know the answer to your question. This is supposed to be a forum to help people.

HTH

T2

_________________
-----------------------------------------------------------
What time is it? It's Fender Time.