i wanna put one on so how what kind of switch do i need.

You could do it many ways with a n.o. momentary push button switch or a on/off Mini Toggle Switches

Why not simply lower the volume control to '0'?

Any way, a single pole, single throw switch will fulfill your requirements.

_________________
You dig?

Hi masterofinsanity,

What do you mean by a "kill switch"? Some people refer to the switch that bypasses all controls and puts the bridge pup directly across the output, as a "kill switch", when it is actually a "passing lane" switch.

_________________
---> "The amp should be SWITCHED OFF AND UNPLUGGED before you do this!" <---

Por favor, disculpe mi español, no se llega a la práctica con mucha frecuencia.

If you're wanting to cut off all electronics in the guitar, why not get a cable with a circuit breaker switch built in. I have one of these and use it when swithching between guitars so I don't have to rely on the sound guy to mute me when I unplug and plug back in. Mine is from Planet Waves. I don't use it that much unless I'm going back and forth between acoustic and electric and I'm somewhere where there are not enough open channels to the house sound system or I'm playing through one amp.

Jeff

maybe like a button to use like a les paul the guitar only has one tone and voulume and one humbucker

I've been using one of the Planet Waves circuit breaker cords for about two or three years now and it works great.

_________________
OK, I'll hum a little bit, got it now?