Hi,I would like to know about mapel neck of Fender American Special.

1.The Neck Finish that Satin Urethane Finish All / or gloss headstock face with satin urethane finish on back of neck ?


Swirl&Haze Remover from Fender Instrument Care Kit

2. I have missed a little Swirl&Haze Remover Spill on Fingerboard Face Maple neck, It will affect the coating or not? I'm quite worried.


thankyou for information.

I believe it has satin urethane on the back and gloss on the front of the neck. I'm 90% sure on that, hopefully somebody can chime in and account for the other 10%.

The swirl and haze remover shouldn't affect the finish on the neck at all. It's urethane and that stuff is very mild cleanser formulated to clean urethane. I wouldn't clean the board with it because excess moisture can go down and cause problems where the frets are, but you should be fine accidentally spilling it once. That kind of problem happens when somebody cleans the board every day with that stuff for a year.

_________________
I traded my car in for a microphone.

The American Special has a satin finish neck...the whole neck.

As for the spill, a gentle clean and shouldn't be any problem.

HTH

T2

_________________
-----------------------------------------------------------
What time is it? It's Fender Time.

If it's put out by Fender, as you've indicated, then nothing to worry about. Fender ain't gonna sell anything that would harm the finish on their own products.

_________________
"It's about sound and sound alone. Looks are irrelevant. You can have the best-looking guitar on earth, but if the sound isn't there it is nothing more than a beautiful piece of trash. The sound it makes is the soul of any guitar."