Having some coffee, will take the guitar apart in a few minutes and re-do stuff.

Thank you so much for your persistence and knowledge, I appreciate it very much !!!!!

I was careful to do what you wanted and double checked everything.

Sunday at 3:10 neck was LOUD, but mis- spelled.

I'm not sure where to start with that. Can you post some clear pics of the connections?

Just walked in the door.....it will take me a few mins to take pictures, but its exactly as your diagram wanted......as I soldered a wire, I tripled checked everything before I did a check mark on the diagram to show it was done.

Checked everything for the 4th time.......exactly as your diagram wanted.

I don't see anything obvious in the pictures, but after looking at your descriptions I'm thinking that the Bridge pup's ground lead is somehow connecting ton the Neck pup's splits (the Red & White wires). Is the ground wire of the Bridge pup connected to screw terminal 6 on the Liberator?

Look at all of your connections for solder bridges or stray wires shorting - something like that.

Then, look at the ground lead of the Bridge pup. Look at the Red & White wires from the Neck pup. Look at the Red & White wires from the Liberator. Look at the wire from pin 5 on the Megaswitch to the push-pull.

I will as soon as I get home from work tomorrow, Im tired and heading to bed now, It was a very hot day at work, and it wore me out. Thank You.

Everything looks perfect, all solders are tight and no drips or stray wires and it is what
the diagram said to do. The guitar has been sitting now for 2 days with no strings on...is that bad for the neck with no tension on it ??? Should I leave the guts out and restring for now ????

Does anyone here know if its ok to leave my guitar neck unstrung with no tension for three days, or should I string it back up ????

Unless you play with heavy strings & have the truss rod cranked down to straighten the neck, I doubt that having it unstrung for a few days will be a problem.

thank you

Did you get my PM?

Yes, should take about 3-5 days. I will let you know when I receive them.

package has been mailed......should be here on Mon or Tues...hope it fits my guitar !!

Here's what I've come up with for the Super Switch. I've changed how the switching works so that the Blend pot is active for positions 2, 3, & 4 and out of the circuit in positions 1 & 5.

The Neck humbucker is autosplit only in position 4.

Ignore the ground wire to the Super Switch for now.