Hey guys, I need a little help with some pups i recently acquired. They are SSS, Fender SCN rev.D, SCN is stamped in the pups where it should be with Fender logo and info on the underside, They look like they are from the Deluxe. However there is no green ground wire connected to the pups and no evidence to show there ever was? I thought that all noiseless pups have the additional ground. The pups work fine. So, are the wires missing or does anyone have any thoughts?

Do they have the square, circle and triangle solder blobs?

If not they are counterfeit.
If they do have em. Check if two have been soldered together.

_________________
No no and no

All solder points are present, triangle, square and circle with all wires where they should be except green to the square solder point?

Unless you are doing something with S-1 switching, just use a small piece of wire to jumper from where the green wire should be to the black wire solder pad on the pickup and all will be right.

_________________
Bill

All I can think is that someone has removed the green ground wire and joined the solder lug to the black wires solder lug.
(sorry not sure about colours. Been ages since I saw mine)

Posted at the same time as Bluesky

_________________
No no and no

No worries.

_________________
Bill

Except for the nine minute delay due to my pondering on whether to delete or amend.

Still, we're agreed, thats where to be lookin.

_________________
No no and no