Help me how to make a sync twin pivot tremolo

1 Cut a angled bit of wood like this



2 put it between the tremblock and the cavity wall, like this.



Cut the block 2x1" . Angle the thickness 3/8" to 3/4" or it may be 1/4"-5/8".

_________________
No no and no

You can buy pre cut wedges at most lumber yards. Don't buy the common cedar wedges used as shim for installing doors and windows. You want to use as hard a wood as you can find. (assuming your purpose is to increase sustain)

_________________

Just think of how awesome a guitar player you could have been by now if you had only spent the last 10 years practicing instead of obsessing over pickups and roasted maple necks.