This is another small project. There is a new HSS pick guard and I put in the 3 way fender tele switch. Need help wiring this puppy. I wanted standard Tele wiring with the exception of two tone controls for each pickup and master volume for both. Thank you

Configuration details:
Neck - Fender vintage noiseless
Mid - nothing
Bridge - Gibson USA 57

Pots - 500K volume, 1M tone. I have .22uf capacitors

For starters, you only need one capacitor and I'd recommend .022uf vs. your .22uf.

Solder all your ground wires.

Wire the tone pots exactly the same as you would a Strat but don't solder their white wires to the selector switch (yet).

Wire the volume pot the same as you would a Strat which includes to the output jack.

Wire the selector switch exactly the way it is on a Fender Tele diagram with the only difference being, solder the upper tone pot's white wire along with the hot lead of the neck pickup and with the lower tone pot, solder it's white wire with the hot lead from the bridge pickup.

Enjoy.

_________________
You dig?