It is currently Tue Mar 17, 2020 7:22 am

All times are UTC - 7 hours



Post new topic Reply to topic  [ 4 posts ] 
Author Message
Post subject: HAVE QUESTION ABOUT BRIDGES
Posted: Sat Feb 28, 2009 6:17 pm
Offline
Hobbyist
Hobbyist
User avatar

Joined: Wed Dec 31, 2008 9:56 pm
Posts: 60
Location: Cleveland Tennessee


I've always thought a bridge was seto be level, but the other day i was at the local music store about to plug this fender strat mim in when i noticed that the back of the bridge was raised real bad, i played her for awhile and she played just great.
My guitar was the same way when i bought it. It was even higher on one end to.

SO I GUESS THE QUESTION IS DOES THE BRIDGE HAVE TO BE LEVEL OR CAN IT BE RAISED AND STILL STAY IN TUNE ?

JUST CURIOUS,THATS ALL.

HAVE A GOOD WEEKEND EVERYBODY

JEFF < TENNMAN316 >


Top
Profile
Fender Play Winter Sale 2020
Post subject:
Posted: Sat Feb 28, 2009 6:20 pm
Offline
Rock Star
Rock Star
User avatar

Joined: Wed Jun 13, 2007 7:02 am
Posts: 8609
Location: Vacaville, CA USA
A properly setup Strat with a floating bridge will have a 1/8 in. gap between the guitar body and the back of the bridge.

_________________
Chet Feathers

Authorized TonePros Dealer
Authorized WD Music Products Dealer
F/A Official Southpaw Compliance Certification Tester http://faamps.com/

http://www.facebook.com/cafeathers


I didn't Lose my mind, I traded it for this guitar.


Top
Profile
Post subject:
Posted: Sat Feb 28, 2009 7:23 pm
Offline
Rock Star
Rock Star
User avatar

Joined: Mon Jun 30, 2008 2:52 am
Posts: 3840
Location: Colorado Springs
After being a long-time non-trem Gibson owner, it wasn't long after I got my Strat, and I came exactly to the same realization. "What the ... ??" That was actually what first brought me to this forum. Yes, Mister CAFeathers' post above is locked on and homing -- exactly correct. The amount that the bridge is raised above the body is "the float". For tuning stability, there is a significant percentage of Strat owners that go with no float. If desired, you would accomplish that by tightening down on the trem's "claw screws" and/ or adding a trem spring or two. Personally, I just added a trem spring and called it a day. Just be careful, that by doing so you change the overall string length slightly that may alter the intonation. So if you change the float, check the intonation afterwards. For more info, do a search on 'float'.

_________________
Laughing out loud with fear and hope, I have a desperate plan ...


Top
Profile
Post subject:
Posted: Sun Mar 01, 2009 10:08 am
Offline
Professional Musician
Professional Musician
User avatar

Joined: Wed Feb 20, 2008 2:37 pm
Posts: 1811
Location: San Francisco Bay Area
I believe that the 1/8 (I don't do my own setups.......so take it from there) is the standard floating bridge setup. I've had my guitars setup by a tech.......who asked me "which way do you want it"? Anyway....apparently some prefer bringing the back end of the bridge almost down to the body. Both of my strats are set up so that the back end of the bridge is near the body. I prefer it that way. The only drawback is......when you use the trem.....you can only go down in pitch.......but that's the only way I go anyway.

_________________
"I won't be wronged, I won't be insulted, I won't be laid a hand on. I don't do these things to other people, and I require the same from them."-John Wayne


Top
Profile
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 7 hours

Fender Play Winter Sale 2020

Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to: