I am having trouble locating a wiring diagram for the TBX tone control that is not a modification requiring me to ditch the cap/res. Does anyone know where to find one for the stock parts?

I have a PDF document of the specs and wiring diagram of the HM Strat which has two TBX controls on it. If I can figure out how to post it in here, you could see how they are wiried up.
There are two resistors on each TBX pot which are dual 250K pots, there is an 82Kohm resistor on the top, a 4.7Mohm with a 0.22u cap paralleled on the second pot.
I hope that's helpful. I can't seem to attach a PDF file to this message board.

-Harley

_________________
I only have two brain cells left, and I'm saving them....for this weekend!

This isnt stock TBX but is said to perform a bit better. I use it and agree its a bit smoother with better range than fenders TBX wiring.
http://www.blueguitar.org/new/schem/_gtr/tbx-mods_and_details.pdf

_________________
No no and no

That's a pretty cool one Niki, I'll have to bookmark that and try it on one of my guitars.
I might do it to the HM Strat since it appears that I have a dead middle pickup, and I'm going to replace them with some stacked humbuckers.
Thanks for posting that.

-Harley

_________________
I only have two brain cells left, and I'm saving them....for this weekend!

Thanks a lot for the link to the diagram! I wait to see how the wiring I got works out, but more than likely will go with this mod. It seems to be the most versatile of the ones I've read about.
Thanks again!