It is currently Mon Mar 16, 2020 8:00 am

All times are UTC - 7 hours



Post new topic Reply to topic  [ 8 posts ] 
Author Message
Post subject: SCX2 Line out recording with yamaha audiogram 6 problem
Posted: Thu Sep 06, 2012 4:38 pm
Offline
Hobbyist
Hobbyist

Joined: Wed May 09, 2012 4:54 pm
Posts: 5
Hi, if someone could help, i have the following question:
i have a yamaha audiogram 6 audio interface:
http://usa.yamaha.com/products/music-pr ... mode=model

and i was trying to connect the SCX2 line out to it to record to the computer.

I am using a standard 1/4" mono plug but all i get is an interference sound from the SCX2 speaker. Appart from this, no other sound of the guitar from the speaker and no sound in the audiogram.

Can someone help on how to connect this?...
:?:
Thanks!


Top
Profile
Fender Play Winter Sale 2020
Post subject: Re: SCX2 Line out recording with yamaha audiogram 6 problem
Posted: Fri Sep 07, 2012 4:00 pm
Offline
Fender Staff
User avatar

Joined: Thu Jan 21, 2010 1:12 pm
Posts: 4396
Hi nfmcm,

I am happy to assist. Often, there can be ground loop or other elated noise issues, particularly when working with unbalanced audio lines. Can you tell me a bit more about your setup and how you have your mixer connected with your other equipment? Do you have other monitor speakers and/or other hardware connected as well? Once I have a few more details, I can assist you in clarifying more clearly whether or not the amp may have a problem. Thanks.

Alan

_________________
Fender Technology Support Lab
Fender Musical Instruments Corporation
TSL@Fender.com
(800) 856-9801


Top
Profile
Post subject: Re: SCX2 Line out recording with yamaha audiogram 6 problem
Posted: Sun Sep 09, 2012 2:44 pm
Offline
Hobbyist
Hobbyist

Joined: Wed May 09, 2012 4:54 pm
Posts: 5
Hi Alan.

I have the Laptop connected to the audiogram mixer via usb.
Then i have the cable w/ mono plug from the audiogram to the amp's line out. I've tried conecting to each of the mixer inputs but always the same result, the buzz is always there.
And then another mono cable from the amps input to the guitar.
Nothing more. No other monitors or hardware connected.

Tried today and i can record the guitar sound but always with that loud buzz. I can send you a sample i've recorded today w/ the audiogram if you give me an e-mail address.




Obs: In another ocasion, i've used the X2 line out with a PA system and it worked fine...


Top
Profile
Post subject: Re: SCX2 Line out recording with yamaha audiogram 6 problem
Posted: Mon Sep 10, 2012 1:10 pm
Offline
Fender Staff
User avatar

Joined: Thu Jan 21, 2010 1:12 pm
Posts: 4396
Hi nfmcm,

Thanks for the reply and information. You are welcome to send a sample to us at the email address in the signature below. But, based on your statement that the amp is working correctly when used with a live sound system, I am still concerned that there is some type of noise issue or ground loop present. Do you happen to have a DI box that you could use to balance the line out of the amp and input to your mixer with an XLR cable? Also, I trust that the noise issue is not present when the amp is being used 'stand alone'. Is that correct? Thanks.

Alan

_________________
Fender Technology Support Lab
Fender Musical Instruments Corporation
TSL@Fender.com
(800) 856-9801


Top
Profile
Post subject: Re: SCX2 Line out recording with yamaha audiogram 6 problem
Posted: Wed Sep 12, 2012 2:05 pm
Offline
Hobbyist
Hobbyist

Joined: Wed May 09, 2012 4:54 pm
Posts: 5
When used stand alone there is no noise problem, only when connecting to the audiogram interface. Sorry, i don't have a DI to test.. I've sent you a sample of the interference by e-mail. It has been recorded with cubase and the audiogram interface.


Top
Profile
Post subject: Re: SCX2 Line out recording with yamaha audiogram 6 problem
Posted: Wed Sep 12, 2012 2:57 pm
Offline
Fender Staff
User avatar

Joined: Thu Jan 21, 2010 1:12 pm
Posts: 4396
Hi nfmcm,

I just sent you an email. Thanks.

_________________
Fender Technology Support Lab
Fender Musical Instruments Corporation
TSL@Fender.com
(800) 856-9801


Top
Profile
Post subject: Re: SCX2 Line out recording with yamaha audiogram 6 problem
Posted: Thu Sep 13, 2012 5:34 am
Offline
Hobbyist
Hobbyist

Joined: Wed May 09, 2012 4:54 pm
Posts: 5
Hello.

I got a DI box today and it solved the problem in the lift position.
Thanks for your precious advice!

Best regards
Nuno


Top
Profile
Post subject: Re: SCX2 Line out recording with yamaha audiogram 6 problem
Posted: Thu Sep 13, 2012 1:55 pm
Offline
Fender Staff
User avatar

Joined: Thu Jan 21, 2010 1:12 pm
Posts: 4396
Hi nfmcm,

You are very welcome. I just sent you a message as well.

Cheers,

Alan

_________________
Fender Technology Support Lab
Fender Musical Instruments Corporation
TSL@Fender.com
(800) 856-9801


Top
Profile
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC - 7 hours

Fender Play Winter Sale 2020

Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to: