It is currently Mon Mar 16, 2020 8:32 am

All times are UTC - 7 hours



Post new topic Reply to topic  [ 3 posts ] 
Author Message
Post subject: Centrar mástil y cuerpo antes de taladrar
Posted: Wed Nov 28, 2012 1:13 am
Offline
Hobbyist
Hobbyist

Joined: Sun Aug 12, 2012 4:55 am
Posts: 13
Buenos días:
En Stewmac.com he leido estas instrucciones para centrar el mástil y el cuerpo antes de taladrar. El problema es que no entiendo que significa. No se si es un problema de mi inglés o si es la explicación que es deficiente. Alguiién podría explicármelo con sus palabras?

"To double-check if the neck is centered on the body, take a long straightedge and place it along the edge of the neck. Be sure that a portion of the straightedge is over the body at the bridge's location. Compare the two sides of the neck, and where the straightedge hangs over the bridge (i.e. the straightedge may be even with the outside of the E-string saddles, the outer saddle height screws, the outer edges of the bridge plate, etc.). "


Top
Profile
Fender Play Winter Sale 2020
Post subject: Re: Centrar mástil y cuerpo antes de taladrar
Posted: Sat Dec 01, 2012 9:31 pm
Offline
Hobbyist
Hobbyist
User avatar

Joined: Sat Nov 05, 2011 6:54 pm
Posts: 37
StephenMadrid wrote:
Buenos días:
En Stewmac.com he leido estas instrucciones para centrar el mástil y el cuerpo antes de taladrar. El problema es que no entiendo que significa. No se si es un problema de mi inglés o si es la explicación que es deficiente. Alguiién podría explicármelo con sus palabras?

"To double-check if the neck is centered on the body, take a long straightedge and place it along the edge of the neck. Be sure that a portion of the straightedge is over the body at the bridge's location. Compare the two sides of the neck, and where the straightedge hangs over the bridge (i.e. the straightedge may be even with the outside of the E-string saddles, the outer saddle height screws, the outer edges of the bridge plate, etc.). "


que es exactamente lo que quieres hacer?

colocar una nueva neck a la guitarra o es la que ya tenia antes?


Top
Profile
Post subject: Re: Centrar mástil y cuerpo antes de taladrar
Posted: Sun Dec 16, 2012 2:34 pm
Offline
Hobbyist
Hobbyist

Joined: Fri Nov 16, 2012 4:41 pm
Posts: 1
Te dice que pongas un nivel (o una regla larga) a lo largo de ambos bordes del mástil, y compruebes si la regla cruza el puente igual en los dos. Por ejemplo, en el borde externo de las silletas de la primera y sexta cuerdas....


Top
Profile
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 7 hours

Fender Play Winter Sale 2020

Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to: