It is currently Mon Mar 16, 2020 8:59 pm

All times are UTC - 7 hours



Post new topic Reply to topic  [ 4 posts ] 
Author Message
Post subject: Strange behaviour after drag and drop effects in Fuse
Posted: Tue Sep 17, 2013 5:38 pm
Offline
Aspiring Musician
Aspiring Musician
User avatar

Joined: Fri Feb 08, 2013 7:58 am
Posts: 308
Location: Prato - Italy
Hi,
i noticed that every time i drag and drop an effect in Fuse 2.7.1 , for example stompbox (but is true for every other category of effect in a slot) in pre-amp chain, occurs an unexpected switching of another effect in this case the delay.. but the led indicator doesn't light on so you can't see the new status "on" but you can hear it.
I have Mustang 3 v.2 connected to a notebook with windows 7 64 bit..
First i noticed this problem in the default preset "Europa" which i tweaked by setting a much lower gain a much higher Bias, and adding a tape delay in post chain with the delay parameter of feedback very high so as soon as it is switched on in some way, you can notice immediately the presence of that effect... that should not be there unless i decide to switch it on by 4 buttons pedalboard.
At that point you have to switch on really that effect and then switch it off to disable it. Of course the problem happens also in other presets.
And now i remember that occurred also in my pc in Windows 7 ultimate 32 bit.. but should be a previous version of Fuse ... 2.6 or earlier when i hadn't the notebook, perhaps happened even also at the times when i had the Mustang 3 v.1..

someone else is having this strange behavior?

Dimitri


Top
Profile
Fender Play Winter Sale 2020
Post subject: Re: Strange behaviour after drag and drop effects in Fuse
Posted: Wed Sep 18, 2013 6:38 am
Offline
Hobbyist
Hobbyist

Joined: Wed Apr 11, 2012 9:36 am
Posts: 5
Yes, I get this as well. I'd noticed before that sometimes effects were sounding even though they were switched off in the Fuse UI and on the Mustang. Hadn't tied it down to drag'n'drop till now. Just repro'd the problem.

I'm using a Mustang Floor, Fuse 2.7.1, Windows 7 64 bit.


Top
Profile
Post subject: Re: Strange behaviour after drag and drop effects in Fuse
Posted: Fri Sep 20, 2013 9:41 am
Offline
Aspiring Musician
Aspiring Musician
User avatar

Joined: Fri Feb 08, 2013 7:58 am
Posts: 308
Location: Prato - Italy
steveBowman wrote:
Yes, I get this as well. I'd noticed before that sometimes effects were sounding even though they were switched off in the Fuse UI and on the Mustang. Hadn't tied it down to drag'n'drop till now. Just repro'd the problem.

I'm using a Mustang Floor, Fuse 2.7.1, Windows 7 64 bit.


Hi Steve,
thanks for your answer.
perhaps could be fixed in a next update of FUSE together to several other graphical interface (and funcionality) improvements previously suggested.


Dimitri


Top
Profile
Post subject: Re: Strange behaviour after drag and drop effects in Fuse
Posted: Fri Sep 20, 2013 4:46 pm
Offline
Fender Staff
User avatar

Joined: Thu Jan 21, 2010 1:12 pm
Posts: 4396
Hi Guys,

We will be happy to assist. Thanks for reporting this. We will look into this and see if we can reproduce the behavior here. Please let us know if we can assist further.

_________________
Fender Technology Support Lab
Fender Musical Instruments Corporation
TSL@Fender.com
(800) 856-9801


Top
Profile
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 7 hours

Fender Play Winter Sale 2020

Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to: