It is currently Mon Mar 16, 2020 9:36 pm

All times are UTC - 7 hours



Post new topic Reply to topic  [ 3 posts ] 
Author Message
Post subject: FUSE: different scale type than the amplifier
Posted: Sat Aug 10, 2013 2:27 am
Offline
Aspiring Musician
Aspiring Musician
User avatar

Joined: Fri Feb 08, 2013 7:58 am
Posts: 308
Location: Prato - Italy
Hi,
so far I have used little Fender Fuse to program the presets because I have the display (Mustang3 v2) and recently, using more Fuse, I realized that the scale used for many effects parameters is different from what we see on the display of the amplifier .
In practice, many effects on the display of the amplifier have the scale of many tube amplifiers Fender ranging from 1 to 10.
In Fuse, instead, the same parameters have a scale ranging from 0% to 100% (which equals 0 to 10) and sincerely is more simple "calculate" the percentage of a parameter at glance with this type of scale.
I think it would be better do a firmware update so that the scale type become the same in both mustang display and Fuse advanced parameter display.. and what you see and set in Mustang will match with what you see and set in Fuse. and to say, know that, okay now I'm setting it at 25% (or 2.5 in a scale that goes from 0 to 10), then I put it to 75% (or 7.5) and so on.
Otherwise you have to keep in mind two kinds of different scales to achieve the same result can be confusing and even lead to some mistakes.

I think, you can make an exception for the main parameters of the amplifier because that scale is printed on the amplifier board and as mentioned respects a historical feature of the real amps.
However, for me (and perhaps other user) it would not be a problem to see those parameters with scale 0 to 10 as you can (except for the Master Knob) do a visual reference to the more accurate virtual knobs on the amp menu (although it may like, the same , act on the physical knobs instead of the Data wheel)

what do you think about?

Dimitri


Top
Profile
Fender Play Winter Sale 2020
Post subject: Re: FUSE: different scale type than the amplifier
Posted: Thu Aug 15, 2013 12:12 pm
Offline
Fender Staff
User avatar

Joined: Thu Jan 21, 2010 1:12 pm
Posts: 4396
Hi frondizi,

We will be happy to assist. Thanks for your feedback, we will forward this to our engineers and please let us know if we can assist further.

_________________
Fender Technology Support Lab
Fender Musical Instruments Corporation
TSL@Fender.com
(800) 856-9801


Top
Profile
Post subject: Re: FUSE: different scale type than the amplifier
Posted: Fri Aug 16, 2013 3:53 pm
Offline
Aspiring Musician
Aspiring Musician
User avatar

Joined: Fri Feb 08, 2013 7:58 am
Posts: 308
Location: Prato - Italy
Thanks a lot!
Dimitri


Top
Profile
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 7 hours

Fender Play Winter Sale 2020

Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to: