It is currently Mon Mar 16, 2020 9:37 pm

All times are UTC - 7 hours



Post new topic Reply to topic  [ 10 posts ] 
Author Message
Post subject: Mustang Floor Output Question
Posted: Tue Jun 25, 2013 12:47 pm
Offline
Aspiring Musician
Aspiring Musician

Joined: Tue Jul 17, 2012 5:43 pm
Posts: 532
Location: Here In Oregon
Can both the unbalanced 1/4 inch L&R outputs and both the XLR balanced L&R outputs on the Mustang Floor be used simultaneously? That is all 4 outputs simultaneously.

_________________
http://www.fullspectrumonline.com


Top
Profile
Fender Play Winter Sale 2020
Post subject: Re: Mustang Floor Output Question
Posted: Tue Jun 25, 2013 4:42 pm
Offline
Fender Staff
User avatar

Joined: Thu Jan 21, 2010 1:12 pm
Posts: 4396
Hi HIO,

We will be happy to assist. The Fender® Mustang™ Floor runs both both unbalanced 1/4" and the balanced XLR outputs parallel, so yes, you can use all 4 of them simultaneously, but you will not be able to control Volume for the two sections separately. Hope this helps, and please let us know if we can assist further.

_________________
Fender Technology Support Lab
Fender Musical Instruments Corporation
TSL@Fender.com
(800) 856-9801


Top
Profile
Post subject: Re: Mustang Floor Output Question
Posted: Wed Jun 26, 2013 11:46 am
Offline
Aspiring Musician
Aspiring Musician

Joined: Tue Jul 17, 2012 5:43 pm
Posts: 532
Location: Here In Oregon
Fender TSL wrote:
Hi HIO,

We will be happy to assist. The Fender® Mustang™ Floor runs both both unbalanced 1/4" and the balanced XLR outputs parallel, so yes, you can use all 4 of them simultaneously, but you will not be able to control Volume for the two sections separately. Hope this helps, and please let us know if we can assist further.


Wow, you are *not* a BOT. :P Thank you for answering my question; it is most appreciated.

_________________
http://www.fullspectrumonline.com


Top
Profile
Post subject: Re: Mustang Floor Output Question
Posted: Wed Jun 26, 2013 1:10 pm
Offline
Fender Staff
User avatar

Joined: Thu Jan 21, 2010 1:12 pm
Posts: 4396
Hi HIO,

No problem, we are happy to help. Please let us know if we can assist further.

_________________
Fender Technology Support Lab
Fender Musical Instruments Corporation
TSL@Fender.com
(800) 856-9801


Top
Profile
Post subject: Re: Mustang Floor Output Question
Posted: Fri Jun 28, 2013 12:57 pm
Offline
Hobbyist
Hobbyist
User avatar

Joined: Tue Jun 18, 2013 5:56 pm
Posts: 45
Can you select which output you can control the volume on?......XLR or 1/4"?

Big Al
Sacramento

_________________
Never Give Up Never Surrender!
Image


Top
Profile
Post subject: Re: Mustang Floor Output Question
Posted: Fri Jun 28, 2013 5:28 pm
Offline
Fender Staff
User avatar

Joined: Thu Jan 21, 2010 1:12 pm
Posts: 4396
Hi Big Al 1964,

Unfortunately the volume control on the Fender® Mustang Floor runs parallel, which means you can't adjust the Volume for the XLR and 1/4" separately. Please let us know if we can assist further.

_________________
Fender Technology Support Lab
Fender Musical Instruments Corporation
TSL@Fender.com
(800) 856-9801


Top
Profile
Post subject: Re: Mustang Floor Output Question
Posted: Fri Jun 28, 2013 8:52 pm
Offline
Aspiring Musician
Aspiring Musician

Joined: Tue Jul 17, 2012 5:43 pm
Posts: 532
Location: Here In Oregon
Fender TSL wrote:
Hi Big Al 1964,

Unfortunately the volume control on the Fender® Mustang Floor runs parallel, which means you can't adjust the Volume for the XLR and 1/4" separately. Please let us know if we can assist further.



But you can from the amplifier(s) or the PA that you are running through. :)

_________________
http://www.fullspectrumonline.com


Top
Profile
Post subject: Re: Mustang Floor Output Question
Posted: Mon Jul 01, 2013 9:02 am
Offline
Fender Staff
User avatar

Joined: Thu Jan 21, 2010 1:12 pm
Posts: 4396
Hi HIO,

You can adjust the line signal coming from your Fender® Mustang™ Floor, on your mixer going to the front of house system. However, if you raise the level on your Fender® Mustang™ Floor the overall level including line level, will be affected. If you have a Fender® Mustang™ III/V (V.2) amplifier, you have the ability to independently adjust both the speaker signal and the balanced Line Out level. Hope this helps, please let us know if we can assist further.

_________________
Fender Technology Support Lab
Fender Musical Instruments Corporation
TSL@Fender.com
(800) 856-9801


Top
Profile
Post subject: Re: Mustang Floor Output Question
Posted: Tue Jul 02, 2013 4:26 pm
Offline
Aspiring Musician
Aspiring Musician

Joined: Tue Jul 17, 2012 5:43 pm
Posts: 532
Location: Here In Oregon
Fender TSL wrote:
Hi HIO,

You can adjust the line signal coming from your Fender® Mustang™ Floor, on your mixer going to the front of house system. However, if you raise the level on your Fender® Mustang™ Floor the overall level including line level, will be affected. If you have a Fender® Mustang™ III/V (V.2) amplifier, you have the ability to independently adjust both the speaker signal and the balanced Line Out level. Hope this helps, please let us know if we can assist further.


Thanks for further clarification.

_________________
http://www.fullspectrumonline.com


Top
Profile
Post subject: Re: Mustang Floor Output Question
Posted: Tue Jul 02, 2013 5:11 pm
Offline
Fender Staff
User avatar

Joined: Thu Jan 21, 2010 1:12 pm
Posts: 4396
HIO,

You are welcome. Please let us know if we can assist further.

_________________
Fender Technology Support Lab
Fender Musical Instruments Corporation
TSL@Fender.com
(800) 856-9801


Top
Profile
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

All times are UTC - 7 hours

Fender Play Winter Sale 2020

Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to: