It is currently Mon Mar 16, 2020 9:39 pm

All times are UTC - 7 hours



Post new topic Reply to topic  [ 4 posts ] 
Author Message
Post subject: Trouble Setting Up Footswitch for Mustang II
Posted: Sat May 19, 2012 4:05 pm
Offline
Hobbyist
Hobbyist

Joined: Sat May 19, 2012 2:13 pm
Posts: 2
I’ve had the amp just over a month; and just got the foot switch a few days ago.
When I try to set up the switch, I follow the instructions in the manual step by step and it doesn’t work right.

I get the first setting programmed in just fine. But every time I try and set up the second setting, the software keeps kicking me back to the first setting and the second does not get programmed in. Also when attempting to program in the second setting, the “Save” and “Exit” buttons are NOT flashing as they should be in Step 2. The software also will not let me choose a different amp for the second programmable setting.

I feel like I’m missing a step that isn’t even in the manual.

If anybody has any ideas I’d appreciate hearing from you.

Thanks!

Bill


Top
Profile
Fender Play Winter Sale 2020
Post subject: Re: Trouble Setting Up Footswitch for Mustang II
Posted: Sat May 19, 2012 8:36 pm
Offline
Aspiring Musician
Aspiring Musician
User avatar

Joined: Wed Apr 13, 2011 11:22 pm
Posts: 797
Hi, Bill.
So, for the first pedal assignment, let's call it channel 1 (green), go to the preset that you want for channel 1, hit the save button (it should start flashing), hit the pedal until the light on the left side of the panel goes green and hit the save button again. Repeat this process for channel 2 (red). I haven't tried to do this while using Fuse and I can kind of see a possible situation where it might get unpredictable. Are you trying to save in the orange bank perhaps?

O.


Top
Profile
Post subject: Re: Trouble Setting Up Footswitch for Mustang II
Posted: Sun May 20, 2012 11:00 am
Offline
Hobbyist
Hobbyist

Joined: Sat May 19, 2012 2:13 pm
Posts: 2
Hi "O"!

I was trying to do all this through the Fuse software. I was hoping to be able top customize the settings first. It never occurred to me to try it using just the amp and not the Fuse software. You know how it is when you're in the middle of something like that and you THINK you have tried everything; but you can't see the forest through the trees!

I'll give that a try right now!

Thanks for the response!

Bill


Top
Profile
Post subject: Re: Trouble Setting Up Footswitch for Mustang II
Posted: Sun May 20, 2012 2:36 pm
Offline
Aspiring Musician
Aspiring Musician
User avatar

Joined: Wed Apr 13, 2011 11:22 pm
Posts: 797
Mr00015 wrote:
Hi "O"!

I was trying to do all this through the Fuse software. I was hoping to be able top customize the settings first. It never occurred to me to try it using just the amp and not the Fuse software. You know how it is when you're in the middle of something like that and you THINK you have tried everything; but you can't see the forest through the trees!

I'll give that a try right now!

Thanks for the response!

Bill


Hah! Been there WAAAAY too many times! :lol:
I only use fuse for editing the presets and use the amp itself for choosing the presets I want the foot switch to access.

O.


Top
Profile
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 7 hours

Fender Play Winter Sale 2020

Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to: