It is currently Mon Mar 16, 2020 9:00 pm

All times are UTC - 7 hours



Post new topic Reply to topic  [ 9 posts ] 
Author Message
Post subject: MUSTANG amp technical specifications and power of the DSP
Posted: Wed Feb 15, 2012 9:58 am
Offline
Hobbyist
Hobbyist
User avatar

Joined: Fri Aug 22, 2008 5:16 am
Posts: 19
Wanted to know the technical specifications of the amplifier
as mentioned in Example:

Sampling Frequency: 96kHz ●A/D Conversion: 24bit, 64times over-sampling ●D/A Conversion: 24bit, 64times over-sampling ●Signal Processing: 32bit ●Frequency Response: 20Hz - 40kHz + 1.0dB, -3.0dB (10kΩload)●Input: 1/4'' phone jack ●Rated input level: -20dBm ●Input impedance: 1MΩ ●Output: 1/4'' stereo phone jack (Line / headphones combined) ●Maximum output level: +5dBm (Output load impedance: 10kΩ or higher) ●Phones Output Level: 20mW + 20mW into 32Ω load

As detailed in the example. Because I'm curious...


Top
Profile
Fender Play Winter Sale 2020
Post subject: Re: MUSTANG amp technical specifications and power of the DS
Posted: Wed Feb 15, 2012 11:50 am
Offline
Fender Staff
User avatar

Joined: Thu Jan 21, 2010 1:12 pm
Posts: 4396
Hey Nino,

I'll do my best to get that info for you. What model do you want the tech specs for?

_________________
Fender Technology Support Lab
Fender Musical Instruments Corporation
TSL@Fender.com
(800) 856-9801


Top
Profile
Post subject: Re: MUSTANG amp technical specifications and power of the DS
Posted: Wed Feb 15, 2012 2:42 pm
Offline
Hobbyist
Hobbyist
User avatar

Joined: Fri Aug 22, 2008 5:16 am
Posts: 19
Thanks for the quick response. I wanted to know the specifications for the Mustang I amplifier,because it interests me what the quality of the sound source I will record when I used the amplifier in the studio...

And if it is a strong DSP engine... Could it perhaps support more internally effects,
Perhaps more than perhaps five or six groups of effects which would be more than common.

It would be excellent and professional tool for some users.

Thanks in advance


Top
Profile
Post subject: Re: MUSTANG amp technical specifications and power of the DS
Posted: Wed Feb 15, 2012 2:57 pm
Offline
Fender Staff
User avatar

Joined: Thu Jan 21, 2010 1:12 pm
Posts: 4396
I'm checking on that now. I do know that there isn't much more DSP left for expansion. Also, at $99 I seriously doubt the tech specs are going to knock your socks off. Perhaps this is one of those cases where you should let your ears decide whether or not this is the right tool for the job.

Are you planning on micing the amp or recording through USB?

_________________
Fender Technology Support Lab
Fender Musical Instruments Corporation
TSL@Fender.com
(800) 856-9801


Top
Profile
Post subject: Re: MUSTANG amp technical specifications and power of the DS
Posted: Wed Feb 15, 2012 5:04 pm
Offline
Hobbyist
Hobbyist
User avatar

Joined: Fri Aug 22, 2008 5:16 am
Posts: 19
I know that the amplifier is intended for exercising...

But in this situation I use Marshall Guvnor overdrive stompbox in Fender Mustang one where I use other effects, then I plug it in Randall head that uses Marshall 4x12 cabinet, then micing the amp with a shure SM57 and then the sound engineer will find good sound.

Then continue to record.

It is important to use the Mustang amp because I plan to buy a Mustang V Head or a Mustang Floor where I can easily use existing presets and without complications retain my original sound of the recordings in a live situation on a gig. :)


Top
Profile
Post subject: Re: MUSTANG amp technical specifications and power of the DS
Posted: Wed Feb 15, 2012 10:44 pm
Offline
Hobbyist
Hobbyist

Joined: Tue Sep 20, 2011 6:31 am
Posts: 63
Location: France
Here are the DSP chip's specs http://www.futureelectronics.com/en/tec ... 725AF.aspx

_________________
MUSTANG III


Top
Profile
Post subject: Re: MUSTANG amp technical specifications and power of the DS
Posted: Thu Feb 16, 2012 5:26 pm
Offline
Hobbyist
Hobbyist
User avatar

Joined: Fri Aug 22, 2008 5:16 am
Posts: 19
Thank you for your response.

I needed information to know what audio source quality am I recording in...

Dual DSP cores for high performance – 250 MHz per core for 500 MIPS performance
multi-core 24-bit chip,sounds good when told and sounds good when recorded.

This may provide few more things to hear.

Best Bang for the buck...


Top
Profile
Post subject: Re: MUSTANG amp technical specifications and power of the DS
Posted: Tue Feb 21, 2012 8:46 am
Offline
Fender Staff
User avatar

Joined: Thu Jan 21, 2010 1:12 pm
Posts: 4396
Hey Nino,

One of the Mustang engineers responded with these specs:

Sampling Frequency: 44.1kHz ● Signal Processing: 24bit

_________________
Fender Technology Support Lab
Fender Musical Instruments Corporation
TSL@Fender.com
(800) 856-9801


Top
Profile
Post subject: Re: MUSTANG amp technical specifications and power of the DS
Posted: Thu Mar 01, 2012 11:50 am
Offline
Hobbyist
Hobbyist
User avatar

Joined: Fri Aug 22, 2008 5:16 am
Posts: 19
Thank you all for your help.


Top
Profile
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC - 7 hours

Fender Play Winter Sale 2020

Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to: