It is currently Mon Mar 16, 2020 10:22 am

All times are UTC - 7 hours



Post new topic Reply to topic  [ 4 posts ] 
Author Message
Post subject: Fuse: My Mustang Amp's Used Older Version Of Firmware ?
Posted: Thu Oct 14, 2010 6:32 am
Offline
Hobbyist
Hobbyist

Joined: Sun Oct 10, 2010 3:36 pm
Posts: 13
Tells me to power down, hold save, power up. then nothing.

What's up ?


Top
Profile
Fender Play Winter Sale 2020
Post subject:
Posted: Thu Oct 14, 2010 4:10 pm
Offline
Amateur
Amateur

Joined: Sat Sep 18, 2010 2:39 pm
Posts: 155
Hi, I was prompted to update the Mustang firmware during the FUSE V2 installation, and I followed the prompts successfully. Here is a link

http://www.fender.com/support/article.php?kb_id=147

" Fender Mustang I & II Firmware update Your Fender Mustang amp's firmware can be updated by the user with the Fender FUSE software and your amp connected. To do this, please follow the steps below.

1. Go to the Main Menu (top left hand side in the Fender FUSE user interface), and select Utilities and Update firmware.
2. Turn off the power on your Fender Mustang amp. While holding the Save button, turn the power back on.
3. A dialog window will open. Here you will select the firmware file you would like to update to. (Please click here to download the current version of Fender Mustang I &II firmware)
4. Once you have selected the correct firmware file, select it, and Fender FUSE will automatically begin the firmware update process.
5. Once the firmware update is complete, turn your Fender Mustang amp off and back on. At this point, the update process is complete."

Hope this works! If not, I would reinstall for a fresh start.
Cheers


Top
Profile
Post subject:
Posted: Tue Oct 19, 2010 11:54 am
Offline
Hobbyist
Hobbyist

Joined: Sun Oct 10, 2010 3:36 pm
Posts: 13
Hi, sixline. I contacted Fender and got it straightened out.

Basically did as you recommended. Up and running and enjoying the amp !

Thanks !


Top
Profile
Post subject:
Posted: Tue Oct 19, 2010 1:49 pm
Offline
Amateur
Amateur

Joined: Thu Oct 14, 2010 12:56 pm
Posts: 189
Ok, I was confused about the whole firmware thing and I had installed Fuse 2.0.1 when it first came out. They said that firmware 1.4 was included in 2.0.1.

But, how do you know if it installed the 1.4 firmware, you say? You run Fuse, select the Main Menu, Help and then About Fender Fuse. The firmware version will be in the right hand side of the screen. So, I had found that I had version 1.3 installed even after installing fuse 2.0.1. I went and downloaded 1.4 and did the upgrade that way.


Top
Profile
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 7 hours

Fender Play Winter Sale 2020

Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to: