It is currently Mon Mar 16, 2020 3:17 pm

All times are UTC - 7 hours



Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 4 posts ] 
Author Message
Post subject: Stomp Box not saveable as effect on Bronco 40
Posted: Sun Jun 09, 2013 5:13 am
Offline
Hobbyist
Hobbyist

Joined: Sun Jun 09, 2013 4:00 am
Posts: 3
On My Bronco 40 (firmware 1.2 fuse 2.6 / 2.7.0 /2.7.0.30) when i want to save an stomp box effect on the effect knob i get not the option to save it (save effects stay's gray). When i put an other effect as second i get the option to safe it (save effects gets red) but whet i saved it only the other effect was saved.

Best Regards
wersonnst


Top
Profile
Fender Play Winter Sale 2020
Post subject: Re: Stomp Box not saveable as effect on Bronco 40
Posted: Sun Jun 09, 2013 2:41 pm
Offline
Fender Staff
User avatar

Joined: Thu Jan 21, 2010 1:12 pm
Posts: 4396
Hi wersonnst,

We will be happy to assist. Thanks for your feedback, we wil look into this on Monday and test to see if we ca reproduce the behavior. Have you tried updating the firmware for your Fender® Bronco40 and possibly performing a factory restore to see if that helps resolve the issue you are seeing. If you do perform a factory restore, we recommend you backup your amps content using the Fender® Fuse™ Software. Please let us know if we can assist further.

_________________
Fender Technology Support Lab
Fender Musical Instruments Corporation
TSL@Fender.com
(800) 856-9801


Top
Profile
Post subject: Re: Stomp Box not saveable as effect on Bronco 40
Posted: Mon Jun 10, 2013 9:39 am
Offline
Fender Staff
User avatar

Joined: Thu Jan 21, 2010 1:12 pm
Posts: 4396
Hi wersonnst,

We have tested the issue you described briefly here at Fender and e did find that there were some inconsistency with the STOMP selection in the Fender® Fuse™ Software. In order for us to troubleshoot further, could you please list the exact steps you took to reproduce this behavior and we will try testing for the issue here at Fender. Thanks and we look forward to hearing from you.

_________________
Fender Technology Support Lab
Fender Musical Instruments Corporation
TSL@Fender.com
(800) 856-9801


Top
Profile
Post subject: Re: Stomp Box not saveable as effect on Bronco 40
Posted: Fri Jun 14, 2013 9:53 am
Offline
Fender Staff
User avatar

Joined: Thu Jan 21, 2010 1:12 pm
Posts: 4396
Hi

After reviewing the Manual and the behavior described, we can verify that this is not a bug. Due to the current architecture of the Fender® Fuse™ Software, you are not be able to save and control the Stompbox or Postgain function using to the FX, MOD or DLY/REV knob on the Fender® Bronco40™, Fender® Mustang™ Mini, Fender® Mustang™ I/II (V.1)/(V.2) and Passport® mini. If you want to configure and save the Stompbox or Postgain settings to any of these amps, you will need to do so using the Fender Fuse software, saving it directly to the Preset. I hope this clears up any confusion that there might have been with this feature. Please let us know if we can assist further.

_________________
Fender Technology Support Lab
Fender Musical Instruments Corporation
TSL@Fender.com
(800) 856-9801


Top
Profile
Display posts from previous:  Sort by  
Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 4 posts ] 

All times are UTC - 7 hours

Fender Play Winter Sale 2020

Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to: