It is currently Mon Mar 16, 2020 4:38 pm

All times are UTC - 7 hours



Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 5 posts ] 
Author Message
Post subject: OSX Lion/Fuse/Mustang III problem
Posted: Wed Dec 07, 2011 9:56 am
Offline
Hobbyist
Hobbyist
User avatar

Joined: Wed Dec 07, 2011 9:36 am
Posts: 9
Hello all,

I have recently bought a Mustang III (very happy with it- lovely chimey Fender sounds) and loaded the fuse software, both worked together initially & I updated the Mustang to the latest firmware. Now when I start Fuse the screen appears normally for a second then goes darker but still visible. I cannot click on anything. Bottom right says "not logged in". Bottom Left light flickers between red & green and says "Starting up..." (where it normally shows your amp model). I am running Lion (OS X 10.7.2) on a 2011 iMac. I have read about Lion compatability and there is a note from Fender saying you must be logged into Fuse online which I am. Any clues or I am waiting for the Lion compatible Fuse to come out?

Thanks
Pete

_________________
Fender Mustang III V2
Fender Baja Tele


Top
Profile
Fender Play Winter Sale 2020
Post subject: Re: OSX Lion/Fuse/Mustang III problem
Posted: Wed Dec 07, 2011 2:55 pm
Offline
Amateur
Amateur
User avatar

Joined: Tue Sep 06, 2011 10:53 am
Posts: 165
Location: Claremont, NH
petestuff wrote:
"...or I am waiting for the Lion compatible Fuse to come out?"

*Ding*Ding*Ding! We have a winner! ;)


Top
Profile
Post subject: Re: OSX Lion/Fuse/Mustang III problem
Posted: Thu Dec 08, 2011 5:01 am
Offline
Hobbyist
Hobbyist
User avatar

Joined: Wed Dec 07, 2011 9:36 am
Posts: 9
Thanks for the functional reply.
Just odd how Fuse did work up until I updated the amps firmware.

_________________
Fender Mustang III V2
Fender Baja Tele


Top
Profile
Post subject: Re: OSX Lion/Fuse/Mustang III problem
Posted: Thu Dec 08, 2011 4:13 pm
Offline
Hobbyist
Hobbyist
User avatar

Joined: Wed Dec 07, 2011 9:36 am
Posts: 9
For anyone interested, this problem seems to have sorted itself out. Fuse has worked for me today, I had to D/L online patches via my browser due to (known) graphical glitches within Fuse but I was able to get patches to & from the amp without any problems. I got a reply from tech support as below, I had tried rebooting yesterday when I was having the problems without any success. It just decided to work today and I don't know why.

I have to say I am impressed by the Mustang III so far, it sounds very good at low(ish) volumes. I will be testing it out with a band soon so I will be interested to see how it holds up with a loud drummer/bass & vocals. I have been used to using a Hot Rod Deluxe & Line 6 M9.

Thank you & goodnight.
Pete

Fender reply:
The issue you are describing should not be directly related to Fender
FUSE on Lion 10.7. Rather it may be a permissions related issue. You can
try running Repair Permissions from the Applications/Utilities/Disk
Utility to see if that corrects this behavior.

If that does not correct the behavior, I would then suggest that you
create a new Admin-level User Account. Log into that new account and
launch Fender FUSE from there.

_________________
Fender Mustang III V2
Fender Baja Tele


Top
Profile
Post subject: Re: OSX Lion/Fuse/Mustang III problem
Posted: Thu Dec 15, 2011 10:58 am
Offline
Fender Staff
User avatar

Joined: Thu Jan 21, 2010 1:12 pm
Posts: 4396
Hey Pete,

Is FUSE still working for you?

_________________
Fender Technology Support Lab
Fender Musical Instruments Corporation
TSL@Fender.com
(800) 856-9801


Top
Profile
Display posts from previous:  Sort by  
Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 5 posts ] 

All times are UTC - 7 hours

Fender Play Winter Sale 2020

Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to: