It is currently Mon Mar 16, 2020 10:39 am

All times are UTC - 7 hours



Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 1 post ] 
Author Message
Post subject: Fender FUSE Software enhancement request
Posted: Tue Jul 20, 2010 1:15 am
Offline
Hobbyist
Hobbyist

Joined: Mon Nov 05, 2007 10:52 pm
Posts: 14
After using the Fender FUSE software with my G-DEC 3 30 amp, I have some suggestions that would make it easier to use and more effective in being able to produce a wider variety of tones:

(in no particular order)
1. Being able to use the same type of pedal both before and after the amp model, such as a delay before and a delay after the amp, to be able to get two delay pedals in the chain, or other combinations such as two modulation pedals, one before and one after the amp, such as a tremolo and flanger effect, or a tremolo and phaser effect together.
2. Add a stompbox option to the rack effect selections, that would allow you to run one overdrive/distortion stompbox into another.
3. Add a Presence setting to the amp models to allow control of the higher frequencies.
4. Have an option to not use any amp model at all, but to use the unaltered guitar signal with just effects.
5. Have a way to save the amp settings for each model with a setting so that when you change to a different amp model, it would recall those default settings, rather than use the current amp settings.
6. Show a numeric value for each amp knob, with the ability to enter an exact numeric value to set each knob rather than having to move the knob itself. This is done in the display for the pedal and rack effects, but it would be nice to be able to enter the value exactly rather than always having to use the knobs.
7. When saving presets, have the last directory location saved so you don't have to change directories every time you save a preset.
8. Have a "Save As" preset option to make it easier to recall a preset, make some changes and then to save it with a new name.
9. Add the ability to sort presets on the Community web site by amp type.
10. Add the option of a Boost pedal at the beginning of the chain with the option to have the boosted signal mixed into the stompbox pedal selected, such as done by a Voodoo Labs Sparkle Drive, which gives a different tone than simply a boost pedal going into an overdrive pedal.
11. Add the following pedal/rack options, both before and after the amp models:
7-band EQ
4-band Parametric EQ (similar to how this is implemented in Line 6 Gear box)
Boost pedal
Other distortion pedal options: BOSS DS-1, Proco Rat, Timmy pedal, Fulltone OCD or Fulldrive 2
Rotary pedal
Vibrato pedal
Auto-wah pedal
Volume Swell pedal

Thank you for your consideration of these ideas and I would be willing to help be a tester of any enhancements being made to the FUSE software so that you can get some feedback as to how they work from a usability standpoint.


Top
Profile
Fender Play Winter Sale 2020
Display posts from previous:  Sort by  
Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 1 post ] 

All times are UTC - 7 hours

Fender Play Winter Sale 2020

Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to: