It is currently Wed Sep 18, 2019 12:56 pm

All times are UTC - 7 hours



Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 8 posts ] 
Author Message
Post subject: Fuse won't install on MacBook!
Posted: Sat Jul 08, 2017 5:41 am
Offline
Hobbyist
Hobbyist

Joined: Sun Oct 11, 2015 7:39 am
Posts: 81
I can't install Fuse download on my MacBook. Message says not an identifiable Developer. What gives, is there a way around this?

_________________
My Equipment:
Fender USA Pro Telecaster HS
Fender Super Champ X2 15W tube combo.


Martin D-18 E Retro, Martin GPCPA4-Nat.
Fishman Loudbox Artist acoustic amp.


Top
Profile
Fender Play April 2019
Post subject: Re: Fuse won't install on MacBook!
Posted: Sat Jul 08, 2017 7:53 am
Offline
Hobbyist
Hobbyist

Joined: Fri Jul 07, 2017 5:05 pm
Posts: 5
Hi!

Just got the Passport Mini and installed FUSE on a Mac (Sierra 10.5).
I found the forum and since people write about things not working,
I thought I'd share my experice with this.

INSTALLATION
MacOS 10.5 really want to protect you computer so the installation
need som extra steps. I started with installing
MonoFramework-2.6.7_2.macos10.novell.universal.pkg
first, since this needs to be installed when the FUSE package is installed.
This is found in the
/Volumes/Fender FUSE Installer/Fender FUSE Installer.app/Contents/Resources

(To get there I opened "Terminal" in Application/Utilities. In this window you can type
open "/Volumes/Fender FUSE Installer/Fender FUSE Installer.app/Contents/Resources"
and the click on the
MonoFramework-2.6.7_2.macos10.novell.universal.pkg
icon.)

It fails to install first due to security settings, but after first try,
I opened
Preferences - > Security & Privacy
to allow this intaller to run (found under the General Tab).

After this, the main installation works. I had to allow this package to install in the Preferences again.

(The real solution for this is for Fender to get their application signed, or have in Apple's App Store.)

RUNNING THE APPLICATION

This works fairly fine. One thing that does not work is searching
to the web, even if I'm logged in. I can open the "Web community" view
and browse the presets, but after clocking the first "Download", this
window is blank. I guess this is because Fender has chosen to have Flash
content as part of the downloading stuff. My work around is to use Safari
and, after allowing Flash for these pages, I can download presets, and then
import them from the FUSE application.

I do feel worried about the lack of support from Fender, that several
persons have expressed in this forum. I Fender stops maintaning this,
they should release cthe code to the public domain.

I hope this project
http://forums.fender.com/viewtopic.php?f=26&t=106791
will be successful.

Hope this helps you and maybe someone else.


Top
Profile
Post subject: Re: Fuse won't install on MacBook!
Posted: Mon Jul 10, 2017 5:05 am
Offline
Hobbyist
Hobbyist

Joined: Sun Oct 11, 2015 7:39 am
Posts: 81
Any help here from a moderator or any help would be appreciated.

_________________
My Equipment:
Fender USA Pro Telecaster HS
Fender Super Champ X2 15W tube combo.


Martin D-18 E Retro, Martin GPCPA4-Nat.
Fishman Loudbox Artist acoustic amp.


Top
Profile
Post subject: Re: Fuse won't install on MacBook!
Posted: Wed Jul 12, 2017 12:28 am
Offline
Hobbyist
Hobbyist

Joined: Wed May 04, 2016 12:03 pm
Posts: 8
When you start the installation you'll get this screen: (but with the fender fuse installation mentioned in it)
Image
Press O.K.
Immediately after that go to "System Preferences">"Security & Privacy"
Image

Then in this screen press "Open Anyway"
Image

_________________
Fender GC USA Pro Standard Stratocaster HSS CRT RW
Fender Mustang III (v2)


Top
Profile
Post subject: Re: Fuse won't install on MacBook!
Posted: Tue Jul 18, 2017 8:12 am
Offline
Hobbyist
Hobbyist

Joined: Tue Jul 18, 2017 8:02 am
Posts: 1
I had the same problem with my MacBook Pro. After installing the two required software packages outlined in the instructions, Fuse still would not install even after I solved the "unidentified" problem.
I merely clicked on the Fender icon on the installer window and dragged it to my desktop. I then clicked on the freshly copied icon and the installation proceeded as expected. Thanks so much for your help!


Top
Profile
Post subject: Re: Fuse won't install on MacBook!
Posted: Fri Feb 01, 2019 1:58 am
Offline
Hobbyist
Hobbyist

Joined: Tue Sep 29, 2015 1:09 am
Posts: 8
Hi, I did reinstall Mac OS on an external ssd disk. Then did download FenderFUSE_FULL_2.7.1.dmg, Silverlight.dmg and XQuartz-2.7.11.dmg.
After the installation (Fuse was the last) it opens the Fuse window with the advise "Loading. Please wait..." and does not go on. The system was restard too.
I still have the sistem on the internal disk a Fuse works. Any help to solve the problem ?


Top
Profile
Post subject: Re: Fuse won't install on MacBook!
Posted: Tue Feb 19, 2019 3:50 am
Offline
Hobbyist
Hobbyist

Joined: Tue Feb 19, 2019 3:43 am
Posts: 1
It is really very common issues as I was also unable to install on MacBook platform. There are some queries along with proper solutions has also been provided by adobe error code df024 that will be helpful for them.


Top
Profile
Post subject: Re: Fuse won't install on MacBook!
Posted: Tue Apr 23, 2019 5:53 pm
Offline
Hobbyist
Hobbyist

Joined: Tue Apr 23, 2019 5:51 pm
Posts: 1
Thank You Heruhur!! Your solution worked perfectly for me. Much thanks!


Top
Profile
Display posts from previous:  Sort by  
Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 8 posts ] 

All times are UTC - 7 hours

Fender Play April 2019

Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to: