It is currently Tue Nov 20, 2018 11:24 pm

All times are UTC - 7 hours



Post new topic Reply to topic  [ 4 posts ] 
Author Message
Post subject: Fuse 2.7.1 running on Windows 10 version 1803
Posted: Tue May 15, 2018 8:46 am
Offline
Hobbyist
Hobbyist

Joined: Mon May 14, 2018 9:30 am
Posts: 7
Location: Seattle, WA
Wanted to report that I've been running Fuse version 2.7.1 successfully on a Lenovo Ideacentre workstation with Windows 10 version 1803 build 17134.48 without any problems.

In case it had a positive impact on the install and operation, I also have the Samsung Smart Switch application installed for my Samsung Galaxy phone. It also installs USB serial drivers for the smartphone in case that may have updated the serial drivers for Fuse.

I've edited presets and also performed direct recordings with the workstation as well. I know the software is not supported any longer, but for those that may have a similar setup hopefully you also have good luck with Fuse working for a little while longer.


Top
Profile
Fender Play November 2018
Post subject: Re: Fuse 2.7.1 running on Windows 10 version 1803
Posted: Sat Aug 18, 2018 3:50 am
Offline
Hobbyist
Hobbyist

Joined: Sat Aug 18, 2018 3:31 am
Posts: 1
SeaRefractor wrote:
Wanted to report that I've been running Fuse version 2.7.1 successfully on a Lenovo Ideacentre workstation with Windows 10 version 1803 build 17134.48 without any problems.

In case it had a positive impact on the install and operation, I also have the Samsung Smart Switch application installed for my Samsung Galaxy phone. It also installs USB serial drivers for the smartphone in case that may have updated the serial drivers for Fuse.

I've edited presets and also performed direct recordings with the workstation as well. I know the software is not supported any longer, but for those that may have a similar setup hopefully you also have good luck with Fuse working for a little while longer.

Hi. I just joined the forum. I have a Mustang 1 and a Mustang V amp head. I'm a Windows Insider; so I have the latest build of 10. Both amps work fine in Fuse.


Top
Profile
Post subject: Re: Fuse 2.7.1 running on Windows 10 version 1803
Posted: Thu Aug 30, 2018 12:51 pm
Offline
Hobbyist
Hobbyist

Joined: Thu Aug 30, 2018 12:33 pm
Posts: 1
I have just had the 1803 update and now I cannot connect the Mustang 1 V2 to my Pc or the the Laptop with same OS. The drivers are not compatible I have tried everything I know of to try and fix this even running in Windows 7 compatibility. Always get this message when I plug the amp into the USB port " The last USB device connect to this computer malfunctioned and Windows does not recognize it" I also show error 43. I don't know what to do at this point any suggestions?


Top
Profile
Post subject: Re: Fuse 2.7.1 running on Windows 10 version 1803
Posted: Wed Sep 05, 2018 9:17 pm
Offline
Hobbyist
Hobbyist

Joined: Wed Sep 05, 2018 9:15 pm
Posts: 1
Same problem here. wont connect


Top
Profile
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 7 hours

Fender Play November 2018

Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to: