It is currently Mon Mar 16, 2020 9:47 am

All times are UTC - 7 hours



Post new topic Reply to topic  [ 4 posts ] 
Author Message
Post subject: Problem Saving Custom Settings In Fuse?
Posted: Thu Aug 09, 2012 7:53 am
Offline
Aspiring Musician
Aspiring Musician

Joined: Sun Jan 16, 2011 9:10 pm
Posts: 406
I was just tweaking preset 2 brit jangle in fuse but in the advanced amp settings i set the compressor to my own custom settings and when i saved my new settings to my G-DEC 3 the compressor settings are not what i saved? It went back to a previous fixed compressor setting,for example low or high,i also had the overdrive stompbox in the effect chain but had it in the bypass mode and when i saved my new settings in fuse to my G-DEC 3 the stompbox was turned on and not in the saved bypass mode? The amp model settings and cab models are saved the way i wanted after tweaking them but not the compressor settings for some reason?

I updated to firmware version 1.04 about three months ago when i bought my G-DEC 3,could this be the reason for the problem i have saving my custom user settings from fuse to my amp?

I hope someone from fender can help me resolve this problem?


Top
Profile
Fender Play Winter Sale 2020
Post subject: Re: Problem Saving Custom Settings In Fuse?
Posted: Fri Aug 10, 2012 4:02 pm
Offline
Hobbyist
Hobbyist

Joined: Fri Jun 22, 2012 9:03 am
Posts: 5
Hi Metalman50,

I will be happy to assist. Let me first ask you which version of Fender FUSE you are running. If you are on a MAC you can go to your Main Menu and click the About My Fender FUSE to find out and if you are on a PC, you can open your Control Panel and click the Uninstall (Or Add/Remove) Programs. Once you see the list of all applications installed on your system you should see two Fender FUSE applications listed. One of them will list a numeric sequence after the name (which is your currently installed version). Please let me know what's installed, and we will take it from there.

Peter Wichers
Technical Support Lab
Fender Musical Instruments Corporation
17600 N. Perimiter Drive, Suite 100
Scottsdale, AZ. 85255
480-596-7195
www.Fender.com


Top
Profile
Post subject: Re: Problem Saving Custom Settings In Fuse?
Posted: Sat Aug 11, 2012 3:32 pm
Offline
Aspiring Musician
Aspiring Musician

Joined: Sun Jan 16, 2011 9:10 pm
Posts: 406
I have a PC computer with windows XP pro and my my current version of fuse is 2.3.0.7.


Top
Profile
Post subject: Re: Problem Saving Custom Settings In Fuse?
Posted: Thu Aug 16, 2012 4:23 pm
Offline
Fender Staff
User avatar

Joined: Thu Jan 21, 2010 1:12 pm
Posts: 4396
Hi Metalman50,

It looks like you have an older version of Fender FUSE software installed. I would suggest that you install our most recent build. You can find that via the link below. Once you get this updated, please check to see if the issue you were seeing is corrected. And please let us know if we can assist further.

viewtopic.php?f=26&t=73607

_________________
Fender Technology Support Lab
Fender Musical Instruments Corporation
TSL@Fender.com
(800) 856-9801


Top
Profile
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 7 hours

Fender Play Winter Sale 2020

Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to: