It is currently Mon Mar 16, 2020 1:39 pm

All times are UTC - 7 hours



Post new topic Reply to topic  [ 6 posts ] 
Author Message
Post subject: How to access SD card; how to import new band tracks to amp
Posted: Fri Jul 15, 2011 4:59 pm
Offline
Hobbyist
Hobbyist

Joined: Thu Jun 30, 2011 8:15 am
Posts: 21
I cannot figure out how to actually access anything that's on my SD card via my G-Dec. I am sure I am just being an idiot, but it is escaping me and I have not seen this documented, only thing I have seen is that you can insert a card with band tracks and have access to them. Ok, HOW??? Also, as I posted in the Fuse thread, I do not have the otpion in Fuse to save to amp so I cannnot figure out how I can add band tracks to the presets in the amp, i,e, replace some of the duplicates with different tracks and add originals, etc.


Top
Profile
Fender Play Winter Sale 2020
Post subject: Re: How to access SD card; how to import new band tracks to
Posted: Sat Jul 16, 2011 5:11 am
Offline
Amateur
Amateur

Joined: Fri May 27, 2011 8:28 pm
Posts: 102
Location: Battle Creek, Mi
Hit the " quick access" button until it says, S D- mp3 for example. Then just turn the gray knob until you get to the song you like

_________________
Frank Betts.
Roland Gr-55.
Boss ME-70 pedal
Fender Mustang IV amp (not version 2)
Fender 2012 American Strat


Top
Profile
Post subject: Re: How to access SD card; how to import new band tracks to
Posted: Sat Jul 16, 2011 5:55 am
Offline
Roadie
Roadie

Joined: Sat Jul 10, 2010 8:15 am
Posts: 229
Also, in fuse go to the media library tab on the top middle of the page. In media library you find the tracks on the sd card, amp and computer. Under sd, double click the track (or right click, load) you want and it should load it onto the preset you are currently in. If you want to save it to that preset tone, hit the save button 2 times and it's now in that preset slot.

If you want to play different tracks to the same preset tone, QA is the way to do that. Just scroll to the track you want like the previous post.

Also, in QA mode you can change presets on the foot-switch while the track is playing to go from lead to rhythm


Top
Profile
Post subject: Re: How to access SD card; how to import new band tracks to
Posted: Sat Jul 16, 2011 3:17 pm
Offline
Hobbyist
Hobbyist

Joined: Thu Jun 30, 2011 8:15 am
Posts: 21
Thanks for the help - I just could not figure that out nor could I find it documented. Also, the fuse documentation does not mirror the latest version of Fuse so not a lot of help there either...

Now that I've done this though, I figure there must be an equally simple way to access the presets I have on the SD card, but once again I am stumped. I cannot find that anywhere in the manuals either. Is there a way to access and scroll through the presets on an SD card the same as you can the band tracks?


Top
Profile
Post subject: Re: How to access SD card; how to import new band tracks to
Posted: Sun Jul 17, 2011 4:07 pm
Offline
Roadie
Roadie

Joined: Sat Jul 10, 2010 8:15 am
Posts: 229
you scroll through the presets in the normal mode when you first turn on the amp. Once you find the preset you want, you can then switch to QA to scroll thru the tracks.


Top
Profile
Post subject: Re: How to access SD card; how to import new band tracks to
Posted: Sun Jul 17, 2011 4:11 pm
Offline
Roadie
Roadie

Joined: Sat Jul 10, 2010 8:15 am
Posts: 229
Sorry, just re-read your post. The sd card is primarily for storing tracks. You can backup presets to the sd card, but there is no way to access them thru the amp. I had the same question when I first got the amp.


Top
Profile
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 7 hours

Fender Play Winter Sale 2020

Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to: