It is currently Mon Mar 16, 2020 2:49 pm

All times are UTC - 7 hours



Post new topic Reply to topic  [ 2 posts ] 
Author Message
Post subject: G-dec 3 medial file
Posted: Tue Apr 19, 2011 11:00 am
Offline
Hobbyist
Hobbyist

Joined: Mon Mar 28, 2011 10:54 am
Posts: 18
Two Questions:
1)I loaded a song from my computer to the media file in Fuse to use as a band track.How do I make it part of a preset?

2)Can I create a new preset using fuse and load it directly to a SD card? When I place my pointer on the new preset box, it does not show a cursor bar?


Top
Profile
Fender Play Winter Sale 2020
Post subject: Re: G-dec 3 medial file
Posted: Wed Apr 20, 2011 11:47 am
Offline
Fender Staff

Joined: Mon Mar 15, 2010 12:46 pm
Posts: 860
Hi jlp1937,

I have sent you an email with detailed information. I have included it here as well. Please let me know if I can assist further.

1. To add a new Band Track to a Preset, right click (control click) on the Band Track name in the Fender FUSE Media Library (Computer tab). Then you will select “Send to amp hard drive”. Once the file transfers over, you will press the “Band” soft button on the amp, under the amp’s display. There you will right arrow one click and turn the silver encoder knob to select the Band Track you want to add to your Preset. Then you will press the Save button on your amp. Press Save again to confirm.

You may encounter two issues. Mem lock would be one. Memory lock can be turned off by going to the Utility menu (hold the Exit button for 2-3 seconds) and pressing the right arrow button three clicks. Turn the encoder knob to off. The other issue you may encounter is not enough memory to add the Band Track(s). In this case, you will need to delete some Band Tracks to clear space on the amps hard drive. You can do this by right clicking on the Band Track(s) you would like to remove in the Fender FUSE Media Library (Amp tab) and selecting “Delete”.

2. To create a new Preset, you would press the New button on the upper left of the Fender FUSE user interface. This should create a new Preset with a “BlkfaceCln” model and no effects. Once this is done, set up the Preset the way you would like it, and save it with the name of your choice. Now go to the Media Library (Computer tab) and right click to send it to the SD card. You would select “Send Preset to SD card”. Once the Preset is on the card, you would need to import the Preset to use it on your amp. You can do this via the Utility Menu.



Best Regards,

_________________
Alan Willey
Fender Technology Support Lab
TSL@Fender.com
480.596.7195


Top
Profile
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 7 hours

Fender Play Winter Sale 2020

Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to: