I am putting in a HSH (humbucker bridge - single coil middle - humbucker neck) and I would like to hear from those that have had or tried this concerning what wiring to try. My first thought is :Bridge series - Bridge/middle parallel - Bridge/Neck series in parallel with each other - Middle/Neck parallel - Neck series. Also, maybe the option of selecting neck or bridge in parallel humbucker mode.

Now I have the choice of using a RWRP in the middle and working with the main coil in the humbuckers or using a standard single in combination with the slug coil for the parallel modes (2 and 4).

Of course I will try different wiring and test but I wondered if any of you had any Ideas.

The pickups will be Dimarzio 39th Anniversary: +Bridge and Neck F spaced and the single coil is a Texas Special, regular or RWRP. The caps will be bumble bee replicas .022. And 500k pots.
One goal here is that all positions be noise cancelling.

I know this is a lot to think about but if have any ideas I can design the wiring and would love to hear them.

_________________
My ability to spell is in direct proportion to the amount of coffee I've had.

Check this out. There seems to be a problem with some of the diagrams showing. Hopefully it is just my machine or a temporary issue.

https://sites.google.com/site/phostenix ... sh-guitars

_________________
Bill

Thanks, that looks like a pretty good resource.

_________________
My ability to spell is in direct proportion to the amount of coffee I've had.

I've referred to it several times.

_________________
Bill