Hi, I'm kind of new to amplified guitar playing and purchased a new Fender 65r about 3months ago. As this is a discontinued model I can't find much info. I am trying to find out the best way to hook up a Digitech RP200A to this amp. There are several inputs on the front of the amp and was wondering if anyone could tell me which to use.

If you didn't get the manual when you bought your pedal, here's the link to the PDF:

http://www.digitech.com/system/documents/83/original/RP200A%20Manual.pdf?1289516137

Here's how to plug up your pedal (a diagram is on page 5 of the manual):

1. Plug your guitar into the "INPUT" port on your Digitech Pedal.

2. Run an instrument cable from the "OUTPUT" port on your Digitech Pedal to the "INPUT" port on your Frontman 65R (or any amplifier)

3. Rock on!

Welcome to the Forum, by the way. I'm Screamin' Armadillo and I am a guitar-holic.

_________________
Good Vibes To Y'all!



Screamin' Armadillos
Texas Roadhouse Music
Guitar/Slide Guitar/Harp/Vocals

Thank you very much. I did run the manual as a pdf and it is like you said. I guess I wasn't sure what the power in and power out ports on the front of the amp were for. I have searched this site for ways to contact someone at Fender directly but they seem to want to remain hidden.

This might help:

http://support.fender.com/manuals/guitar_amplifiers/Frontman_65R_manual.pdf

I didn't look through it, but Fender manuals are usually pretty good for telling you what you really need to know.

By the way, we have a rule here--if you don't post pics of your gear, we have the right to believe you don't really have it... (just kidding).

We would like to see your axes, effects and amps, though...

_________________
Good Vibes To Y'all!



Screamin' Armadillos
Texas Roadhouse Music
Guitar/Slide Guitar/Harp/Vocals