I am trying to dismantle part of my Champ600 so I can dis-connect the speaker cable to plug into and external one (It is too hard to reach in and dis-connect it without removing the back cover). The problem I have is when I remove the 4 screws on the back of the amp I cannot pull the back cover off. Is there any other screws I have to undo or do I have to use some real force to pull the back cover off. I just don't want to damage anything.

_________________

Fender Highway One HSS Stratocaster '09
Modified Fender Champ600
Honer Special20 Harmonica

OK forget that, it just needed a little more force than what I was using.

_________________

Fender Highway One HSS Stratocaster '09
Modified Fender Champ600
Honer Special20 Harmonica

Strat0Blues, I can tell you're not a Texan. If you were, you'd take it apart with this:



And reassemble it with this:





Glad to hear it turned out okay!

_________________
I really like all them "Aster" guitars. You know, like the Stratoc, Telec and Jazzm.