It is currently Mon Mar 16, 2020 7:42 am

All times are UTC - 7 hours



Post new topic Reply to topic  [ 5 posts ] 
Author Message
Post subject: Fender Noiseless wiring diagram help
Posted: Sat Oct 11, 2014 6:30 am
Offline
Hobbyist
Hobbyist

Joined: Sat Sep 26, 2009 8:41 am
Posts: 7
Image

Can someone help me out here with the GREEN item on the diagram?
See this topic:
viewtopic.php?t=2856
looks like I am missing a piece? the long skinny one


Also where does the white wire from the Output Jack go?
it's not on the diagram.
See here:
http://support.fender.com/service_diagr ... B_SISD.pdf
shows this one on the middle connector of the Volume pot.

Thanks


Last edited by buddywhelan on Sat Oct 11, 2014 7:44 am, edited 1 time in total.

Top
Profile
Fender Play Winter Sale 2020
Post subject: Re: Fender Noiseless wiring diagram help
Posted: Sat Oct 11, 2014 8:43 am
Offline
Rock Icon
Rock Icon
User avatar

Joined: Fri Feb 05, 2010 4:31 am
Posts: 14045
Location: Province de Québec, Canada
buddywhelan wrote:
Image

Can someone help me out here with the GREEN item on the diagram?
See this topic:
viewtopic.php?t=2856
looks like I am missing a piece? the long skinny one
The small green item on the volume pot ? In parallele to the red capacitor ? It is a resistor , both are treble bleed circuit . Sorry don't want to read the post

Also where does the white wire from the Output Jack go?
it's not on the diagram.
See here:
http://support.fender.com/service_diagr ... B_SISD.pdf
shows this one on the middle connector of the Volume pot.
Yes, the center lug of the volume pot is connected to the output jack +

Thanks


Top
Profile
Post subject: Re: Fender Noiseless wiring diagram help
Posted: Tue Oct 21, 2014 11:49 am
Offline
Hobbyist
Hobbyist

Joined: Sat Sep 26, 2009 8:41 am
Posts: 7
On the bottom tone pot, it looks like the black and white wires are reversed, or doesn't that matter-
Shouldn't the white wire to the pickup selector be on the middle pot connector and the ground on the right, like the middle pot??


Top
Profile
Post subject: Re: Fender Noiseless wiring diagram help
Posted: Tue Oct 21, 2014 11:51 am
Offline
Hobbyist
Hobbyist

Joined: Sat Sep 26, 2009 8:41 am
Posts: 7
I returned the pickup set due to a bad pickup and got a new set - again - missing the resistor from the parts. What's the deal - it this necessary or do I just use the 681 1kv capacitor???


Top
Profile
Post subject: Re: Fender Noiseless wiring diagram help
Posted: Tue Oct 21, 2014 1:49 pm
Offline
Rock Icon
Rock Icon
User avatar

Joined: Fri Feb 05, 2010 4:31 am
Posts: 14045
Location: Province de Québec, Canada
Use this diagram ,

http://support.fender.com/service_diagrams/stratocaster/010-1000_02B_SISD.pdf


Your diagram is missing the white wire to ( from ) the output jack

The resistor you are talking about is a 220 K ohms , easy available at Radio Shack or any electronic store . The 680 PF capacitor without the resistor won't work fine .

IMO You don't need to put these 2 parts , it is only for different flavor than a "standard " Stratocaster.

Sorry it is a PDF from Fender librairy , link don't work :(


Top
Profile
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 7 hours

Fender Play Winter Sale 2020

Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to: