It is currently Mon Mar 16, 2020 1:03 pm

All times are UTC - 7 hours



Post new topic Reply to topic  [ 2 posts ] 
Author Message
Post subject: 3 pickup Tele wiring w/bridge neck in position 4
Posted: Wed Aug 15, 2012 6:38 am
Offline
Amateur
Amateur

Joined: Sat Apr 18, 2009 1:15 pm
Posts: 172
Location: So Cal USA
Dear Friends
Hello, I wonder if I might find some advice on the wiring scheme I want to try on a Tele build that I am doing. What I have is this,Duncan Broadcaster in bridge pos. Fender twisted tele in the middle pos. and a Gibson 57 classic humbucker in the neck. What I want to do is have the pickups "on In the normal Strat positions except I would prefer that the neck and bridge be on in positiion 4 that is the one that would normally be neck and middle.
The hard ware I have is as follows, concentric 250/500k pot for tone as I want to use a std tele control plate and I have both 250 or 500k pot for volume, I have 470 ohm resistor If needed for volume to deal with the single coil humbucker mismatch,treble bleed kit if necessary a variety of caps in various values for tone pots and a dual wafer super switch,Thanks for reading this very long and boring post. Any advice would be most welcome.Thanks,Craig


Top
Profile
Fender Play Winter Sale 2020
Post subject: Re: 3 pickup Tele wiring w/bridge neck in position 4
Posted: Wed Aug 15, 2012 7:45 am
Offline
Rock Star
Rock Star
User avatar

Joined: Tue Jul 24, 2007 7:33 am
Posts: 8461
Location: Mars, the angry red planet.
wingman111 wrote:
Dear Friends
Hello, I wonder if I might find some advice on the wiring scheme I want to try on a Tele build that I am doing. What I have is this,Duncan Broadcaster in bridge pos. Fender twisted tele in the middle pos. and a Gibson 57 classic humbucker in the neck. What I want to do is have the pickups "on In the normal Strat positions except I would prefer that the neck and bridge be on in positiion 4 that is the one that would normally be neck and middle.
The hard ware I have is as follows, concentric 250/500k pot for tone as I want to use a std tele control plate and I have both 250 or 500k pot for volume, I have 470 ohm resistor If needed for volume to deal with the single coil humbucker mismatch,treble bleed kit if necessary a variety of caps in various values for tone pots and a dual wafer super switch,Thanks for reading this very long and boring post. Any advice would be most welcome.Thanks,Craig


See your other post RE same.

_________________
You dig?


Top
Profile
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 7 hours

Fender Play Winter Sale 2020

Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to: