It is currently Mon Mar 16, 2020 2:15 pm

All times are UTC - 7 hours



Post new topic Reply to topic  [ 2 posts ] 
Author Message
Post subject: new tele noiseless pickup install problem....
Posted: Sun Oct 30, 2011 3:50 pm
Offline
Hobbyist
Hobbyist

Joined: Sun Jun 14, 2009 4:42 am
Posts: 89
Location: Ontario, Canada
Hi everyone,
Today I installed noiseless tele pups in my 2010 mim tele.
neck pickup works great no hum, good vol. etc.

but, the bridge pup is very low in vol, & tinny... I re-soldered the yellow wire to the control incase of cold solder joint but no change!

two points:
1) I copper shielded the body at the same time of pup install.

2) When I touched the yellow wire to the switch where the neck pup goes the vol was normal vol. which is why I re-soldered it to the correct location, thinking it was a cold solder joint.

anyone have any idea what could be wrong?
thanks in advance! :)


Top
Profile
Fender Play Winter Sale 2020
Post subject: Re: new tele noiseless pickup install problem....
Posted: Mon Oct 31, 2011 1:57 am
Offline
Rock Icon
Rock Icon
User avatar

Joined: Fri Feb 05, 2010 4:31 am
Posts: 14049
Location: Province de Québec, Canada
Look you have a bad swith contact, or one of the jumper wire on the switch is missin or have bad solder.

Your pu working when touching switch's neck pu contact = neck pu switch contact /wiring goog = bridge pu good

Coclusion ; problem on switch, look carefully you'll see


Top
Profile
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 7 hours

Fender Play Winter Sale 2020

Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to: