It is currently Mon Mar 16, 2020 3:29 pm

All times are UTC - 7 hours



Post new topic Reply to topic  [ 3 posts ] 
Author Message
Post subject: I get a weird phasing sound on my setup.
Posted: Mon May 09, 2011 7:28 pm
Offline
Hobbyist
Hobbyist

Joined: Mon May 09, 2011 1:11 pm
Posts: 2
Me again but this time I can't seem to get whats wrong. Here's a schematic of my wiring on a Fender of mine. It has Vintage Noiseless in the neck and middle and a Seymour Duncan JB in the bridge. Simple 250k pots and a reg 5 way switch with a on/on/on for series/split/parallel and on/on to but my bridge in all pos.

I get this weird sound I haven't herd, only on my pedal board. It's like a phase wonk, wonk sound I get when I turn on my bridge pickup. It only comes on when I hit the on/on in pos 1, pos 3 and pos 4. When I hit it in pos 2, it sounds like it suppose to. The sound its pretty cool for an effect but not for what I would like it to be.

Here's a pic of what I did. Sorry it looks so kindergarden just bare with me.Image

Let me know what it could be.
Thanks


Top
Profile
Fender Play Winter Sale 2020
Post subject: Re: I get a weird phasing sound on my setup.
Posted: Sun May 15, 2011 12:01 pm
Offline
Hobbyist
Hobbyist
User avatar

Joined: Wed Apr 06, 2011 3:54 pm
Posts: 62
I can't see the diagram.. i think something went wrong with the upload.

Judging from what you wrote about which pickups you have, i think you have the JB connected out of phase. Seymour Duncan winds their pickups in the opposite direction of fender (need someone else to confirm this, but I'm fairly certain i read it somewhere else before) so even if you connect all the wires where you would normally think to (black wires to the ground etc.) the JB would be out of phase with the other, single coils

Good luck getting it sorted out!

_________________
Image


Top
Profile
Post subject: Re: I get a weird phasing sound on my setup.
Posted: Wed Jun 08, 2011 2:00 pm
Offline
Hobbyist
Hobbyist

Joined: Wed Jan 19, 2011 11:16 am
Posts: 86
Sklivas is correct on the SD wiring. In mixing with Fender pickups you will need to reverse the hot and the ground wires. I know, I've done it before. Good luck. Sorry I didn't see the thread was so old, I'm sure you've fixed it by now! :mrgreen:


Top
Profile
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 7 hours

Fender Play Winter Sale 2020

Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to: