It is currently Mon Mar 16, 2020 4:46 pm

All times are UTC - 7 hours



Post new topic Reply to topic  [ 4 posts ] 
Author Message
Post subject: wiring help!!!
Posted: Tue May 04, 2010 6:19 pm
Offline
Hobbyist
Hobbyist

Joined: Tue May 04, 2010 6:14 pm
Posts: 2
i have a fender lead I which has a humbucker at the bridge and i want to add a single coil at the neck...ive been looking all over for a diagram with that set up and i cant seem to find one...what i want is..single coil at the top, humbucker at the bride..there is currently a vol and tone pod ,2 mini toggle switches...if anybody could help me out that would be awesome!!


Top
Profile
Fender Play Winter Sale 2020
Post subject: Re: wiring help!!!
Posted: Wed May 05, 2010 6:28 am
Offline
Rock Star
Rock Star
User avatar

Joined: Tue Jul 24, 2007 7:33 am
Posts: 8461
Location: Mars, the angry red planet.
starla123 wrote:
i have a fender lead I which has a humbucker at the bridge and i want to add a single coil at the neck...ive been looking all over for a diagram with that set up and i cant seem to find one...what i want is..single coil at the top, humbucker at the bride..there is currently a vol and tone pod ,2 mini toggle switches...if anybody could help me out that would be awesome!!


Welcome.

Do you intend on keeping those two mini-switches dedicated to the humbucker as they are now or did you plan on using them as on/off switches, one each for each pickup?

_________________
You dig?


Top
Profile
Post subject:
Posted: Wed May 05, 2010 9:25 am
Offline
Hobbyist
Hobbyist

Joined: Tue May 04, 2010 6:14 pm
Posts: 2
thank you....i would like to have the single on all the time and keep the switches for the humbucker


Top
Profile
Post subject:
Posted: Wed May 05, 2010 9:59 am
Offline
Rock Star
Rock Star
User avatar

Joined: Tue Jul 24, 2007 7:33 am
Posts: 8461
Location: Mars, the angry red planet.
starla123 wrote:
thank you....i would like to have the single on all the time and keep the switches for the humbucker


You're quite welcome.

Once you've installed the single, solder it's negative wire to the back (can) of the volume pot and then solder it's positive wire to the left terminal of the volume pot where it shall be joining whatever other wires that are already there. That's it.

_________________
You dig?


Top
Profile
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 7 hours

Fender Play Winter Sale 2020

Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to: