It is currently Mon Mar 16, 2020 7:21 am

All times are UTC - 7 hours



Post new topic Reply to topic  [ 4 posts ] 
Author Message
Post subject: Black Noiseless pickup Cover
Posted: Sun Feb 17, 2019 2:11 pm
Offline
Hobbyist
Hobbyist

Joined: Sun Feb 17, 2019 1:52 pm
Posts: 1
I hope someone can help me. Since Fender does not make a left-hand Nashville telecaster, I have converted two of my fender telecaster‘s to Nashville style. My next one I’m working on I am morning to add the noiseless telecaster pick ups And wanting to put the black Strat metal pick up in the middle position. Does anybody know where I can get a black noiseless pick up cover. I have found white ones on eBay but cannot locate a black cover. Thanks in advance leading me the right direction


Top
Profile
Fender Play Winter Sale 2020
Post subject: Re: Black Noiseless pickup Cover
Posted: Tue Feb 19, 2019 8:05 pm
Offline
Professional Musician
Professional Musician
User avatar

Joined: Tue Feb 13, 2018 10:28 pm
Posts: 1594
Location: SoCal, US
I managed to source a set out of China. I'm looking for the vendor now (didn't save them to my bookmarks), but the Noiseless are standard 52mm for the bridge, but the neck and middle are the narrower 50mm.
That'll give you a start for searching unless and until I can find my source.

Edit: Found them -
https://www.eyguitarmusic.com/Black-Str ... p_484.html

$9, or $12.50 for the full set, knobs, switch cap, and pickup covers. You can order the covers mixed between 50 and 52mm.

_________________
-- Rich


Top
Profile
Post subject: Re: Black Noiseless pickup Cover
Posted: Sat Sep 07, 2019 6:08 am
Offline
Hobbyist
Hobbyist

Joined: Sat Sep 07, 2019 5:49 am
Posts: 3
Are you guys referring to Fender Vintage Noiseless Pickups? I'd like to put 3 Vintage Noiseless pickups with WHITE covers in one of my Strats but they are only sold in aged white. I've seen the 52mm white bridge pickup (0053339010) Noiseless cover being sold, but not the middle/neck covers. I know that the bridge uses 52mm spacing and that the neck and middle use 50mm spacing, but its the height of the cover that concerns me. I have 2 Vintage Noiseless tele pickups and 1 Vintage Noiseless Strat middle pickup installed in a Fender MP tele plus. The height of that Strat middle pickup cover is about 11mm (just like the pickup cover in that link). But the "flange" (the part the screw goes through) is very thin (maybe 1 mm) on the aged white Fender Noiseless cover. The aftermarket covers in that link have a flange that is 2.5mm thick, according to the diagram. I would think that that would cause the cover to be a bit too high and which would cause the pole pieces to be too low. Is this the case? Does any one have any pictures of these covers installed on top of Vintage Noiseless pickups? Thanks for the help!


Top
Profile
Post subject: Re: Black Noiseless pickup Cover
Posted: Wed Feb 26, 2020 12:17 am
Offline
Hobbyist
Hobbyist

Joined: Mon Feb 27, 2017 10:31 pm
Posts: 2
Will these covers work on the new Fender Gen 4 Noiseless Stratocaster Pickups?

_________________
sleiweke


Top
Profile
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 7 hours

Fender Play Winter Sale 2020

Who is online

Users browsing this forum: Google [Bot] and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to: