It is currently Tue Mar 17, 2020 1:49 am

All times are UTC - 7 hours



Post new topic Reply to topic  [ 2 posts ] 
Author Message
Post subject: Hot Rod DeVille Issues... Please, Please Help!!
Posted: Sun Sep 30, 2012 10:37 pm
Offline
Hobbyist
Hobbyist
User avatar

Joined: Wed Oct 03, 2007 10:56 am
Posts: 2
Hi, everyone.

I need some help with an issue I have with my Hot Rod DeVille 4x10. The deal is that I bought a used late 2000's Hot Rod DeVille from a friend that runs a guitar store and I'm pretty sure he took good care of it. I took it to rehearsal yesterday and played it for about 2 and half hours; I ran a Dean Soltero loaded with Seymour Duncans into a Vox Joe Satriani Satchurator pedal and a Dunlop Crybaby Wah. We were doing a demo, so the studio guy ran a line from the Preamp Out to the mixing board with a standard instrument cable.

I played through the clean channel set on about 3, and a little reverb and presence. I would get this distorted sound from the amp (on 3 in the clean channel), where I would expect a fairly pristine clean sound (allowing for the relative effect of the hot SD pickups). In addition, engaging the Drive channel and More Drive (without any overdrive pedal), it sounded really flabby and "farty". Towards the end, when I would switch on the Vox overdrive the volume would drop.

So, at the end of the rehearsal, the amp just dies. It turns off completely, no light, no power, no sound, no nothing; just completely dead. I call my buddy who sold it and he said I might have blown the output transformer because I ran a line from the preamp out to the board, despite the fact that the manual says that is precisely one of its functions. So I bring it home, to take to the shop on Monday to get it checked out. Just out of curiosity I plugged it in the next day and, lo and behold, it switched on and worked. It still had the same distorsion problems on the clean channel (using a different guitar).

Can someone help me out on what this might be, so I don't get screwed by the repair shop guys? It would seem that the distorsion issue and the amp failure issue are due to different problems, but I have NO clue, as this is only my second tube amp in all my life (six months ago I had bought a Peavey 6505+ 1x12 combo, which is sold to buy the Hot Rod, because I play mostly blues and blues based hard rock and I could not get into the amp's distorsion and relative lack of clean headroom, but it never gave me ANY issues at all). I really appreciate all the help you can give!

Regards -
Andy.


Top
Profile
Fender Play Winter Sale 2020
Post subject: Re: Hot Rod DeVille Issues... Please, Please Help!!
Posted: Mon Oct 01, 2012 3:18 am
Offline
Rock Icon
Rock Icon
User avatar

Joined: Fri Feb 05, 2010 4:31 am
Posts: 14049
Location: Province de Québec, Canada
This make me laugh when I read " amp not working = burn transformer"

First don't go to see this guy for fixing your amp. I He don't know amp .

Second you probably have ;

1- tubes defect ( 6L6 )
2- Or some resistors or bad solder/connection in power supply


Top
Profile
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 7 hours

Fender Play Winter Sale 2020

Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to: