It is currently Tue Mar 17, 2020 4:30 am

All times are UTC - 7 hours



Post new topic Reply to topic  [ 2 posts ] 
Author Message
Post subject: Re-Tolexing
Posted: Tue Nov 23, 2010 4:34 pm
Offline
Hobbyist
Hobbyist
User avatar

Joined: Wed Jul 25, 2007 9:51 am
Posts: 41
Location: Farmington, CT
So I did a stupid thing (again) and decided to spray paint my HRD extension cab black to match the amp. Needless to say, it came out like garbage and looks horrible. I know getting the paint off is possible, but more of a PITA than it's worth so I guess I'll re-tolex it instead. I think I can manage that. So, with that in mind:

1. Where's the best (and cheapest) place to buy tolex?

2. How much will I need?

Thanks all.

- Jeff

_________________
"Another song, another mile." - The Black Crowes


Top
Profile
Fender Play Winter Sale 2020
Post subject:
Posted: Tue Nov 23, 2010 4:56 pm
Offline
Rock Icon
Rock Icon
User avatar

Joined: Wed Mar 31, 2010 12:48 am
Posts: 26417
Location: Tombstone Territory
There are two grades of black Tolex currently available -- the thin, chintzy stuff used on import amps and a thicker type which is close to vintage-spec as used in the '60s and '70s.

I use the latter type and get mine exclusively from this vendor......

http://cgi.ebay.com/Fender-Amplifier-Bl ... 5888ae7a48

To calculate your requirements, you'll need a tape measure and some rudimentary math skills. Examine your cab and note how many pieces are used to cover it. Record those dimensions and add 3 inches to each, to allow for positioning and unexpected surprises. On a sheet of graph paper, sketch out each of your sections to scale and fit them all into a scale 36" x 36" square (one square yard) or if necessary a scale 36" x 54" square (one linear yard). Once you calculate the total area needed for the job, order your material accordingly.

DAP brush-on contact cement (in the red label can) is the most durable adhesive I've found for gluing Tolex to wood. A one-quart can will prolly be sufficient. Follow the directions on the container and USE ONLY WITH ADEQUATE VENTILATION.

Some tools I've found to make the job easier......disposable 1-inch brushes, foam-rubber wallpaper rollers (various sizes), 24" steel carpenter framing square, utility knife with plenty of blades.

Have patience and avoid any distractions while working with this stuff. I do these jobs all the time and they go more smoothly with experience. You can e-mail me direct if you get stumped and need additional advice.

Best of luck, HTH

Arjay

_________________
"Here's why reliability is job one: A great sounding amp that breaks down goes from being a favorite piece of gear to a useless piece of crap in less time than it takes to read this sentence." -- BRUCE ZINKY


Top
Profile
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 7 hours

Fender Play Winter Sale 2020

Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to: