It is currently Tue Dec 18, 2018 3:27 am

All times are UTC - 7 hours



Post new topic Reply to topic  [ 3 posts ] 
Author Message
Post subject: Supersonic 22 cable help
Posted: Wed Oct 17, 2018 10:45 am
Offline
Hobbyist
Hobbyist

Joined: Tue Mar 04, 2014 11:40 am
Posts: 3
Hi all!
I need help with a DIY 7 pin din footswitch cable to 2x TRS-cable. Something like this, https://btpa.com/AS-SS22-XX.html.
I'm thinking something like
TRS 1: Pin 1 to sleeve (ground), Pin 2 to tip (Norm/fat) and Pin 4 to ring (Vint/burn)
TRS 2: Pin 1 to sleeve (ground), Pin 3 to tip (Fx) and Pin 5 to ring (Rev)

Am I thinking right? Where should I connect Pin 7 (Footsw select) and chases ground?

Thanks in adv, Os72

Img from schematics for Supersonic 22.

Image


Top
Profile
Fender Play December 2018
Post subject: Re: Supersonic 22 cable help
Posted: Thu Oct 18, 2018 1:25 am
Offline
Rock Icon
Rock Icon
User avatar

Joined: Fri Feb 05, 2010 4:31 am
Posts: 12512
Location: Province de Québec, Canada
I can't see picture,

Schematic here ;

https://www.thetubestore.com/lib/thetub ... ematic.pdf

_________________
English is not my mother tongue , I do my best


Top
Profile
Post subject: Re: Supersonic 22 cable help
Posted: Sun Oct 21, 2018 11:20 am
Offline
Hobbyist
Hobbyist

Joined: Tue Mar 04, 2014 11:40 am
Posts: 3
Thank you!
I figured it out when I opened the original footswitch. I am going to use the cable for controlling the amp from my Helix. I built a footswitch without the switches where the TRS jacks are replacing the switches. I will put this new box between the amp and Helix. Sounds more complicated when it is.


Top
Profile
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 7 hours

Fender Play December 2018

Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to: